Buy Lifting Magnets Online in Australia
Lifting magnets and magnetic lifters at AIMS Industrial. We list permanent magnetic lifters from Austlift, Prolift, Beaver and Challenger, and Magswitch lifting magnets, hand lifters, fixed hand lifters, Extenda-Lift and MagReach lifters and a Mag Dolly. They lift and position steel plate, bar and round stock without slings or hooks, which saves rigging time in the workshop and on the shop floor.
What's in the range
| Type | What the range includes |
|---|---|
| Permanent magnetic lifters | Austlift and Prolift permanent magnetic lifters in a range of capacities starting at 100 kg and 300 kg, Beaver permanent magnetic lifters from 100 kg to 1000 kg, and a Challenger magnetic lifter in 100 kg and 300 kg. |
| Magswitch lifting magnets | MLAY600 and MLAY1000 lifting magnets, including the x2, x3 and x4 multi-magnet versions. |
| Magswitch hand lifters | Hand Lifter 60-M (manual) and 60-CE (cordless electric, with holster), plus fixed single hand and fixed dual hand lifters. |
| Extenda-Lift, MagReach and Mag Dolly | Extenda-Lift 600 and 1000 (listed by max breakaway in lbs), MagReach 400 with a 50.5 to 90 inch range, and the 917mm Mag Dolly. |
Choosing a lifting magnet
Start with the load. The rated capacity applies to a clean, flat, thick steel surface with full contact, and it drops on thin, curved, rough, painted or hot material, so choose a magnet with a good margin over the load. Check how the magnet is operated, whether it is a manual or cordless electric model, and whether you need a single magnet or a multi-magnet set for long plate. Lifting magnets are lifting equipment, so use them within the rated working load, and have them inspected and tested as your site procedures and the manufacturer require.
Always check the data sheet. Confirm the rated capacity, material thickness and operating conditions before use.
Related ranges
See lifting equipment, Magswitch magnetic holders, magnetic chucks and magnets. Brands: Magswitch, Austlift, Beaver and Challenger.
Order from AIMS Industrial
Not sure which lifting magnet suits your load? Call us on (02) 9773 0122, contact our team or request a quote. We have supplied Australian industry since 1988 and can help you choose by load, material and handling method.
Lifting magnet FAQs
How does a magnetic lifter work?
A permanent magnetic lifter holds steel through magnetic attraction, so you can lift plate or round stock without slings. It is switched on and off by a handle or lever, and the rated lifting capacity depends on the thickness and surface condition of the steel.
What capacities do you list?
Permanent magnetic lifters from 100 kg and 300 kg up, Beaver lifters from 100 kg to 1000 kg, and Magswitch Extenda-Lift lifters listed at 600 lb and 1000 lb breakaway. Check each product for its rated capacity.
Does material thickness affect the rated load?
Yes. Rated capacities assume a clean, flat, thick steel surface. Thin, curved, rough or painted material reduces the holding force, so allow a margin.
What is a Magswitch hand lifter?
A Magswitch hand lifter is a handheld magnetic lifter. We list a manual model (60-M) and a cordless electric model (60-CE with holster), plus fixed single and dual hand lifters.
Do you have a lifter for long plate?
Magswitch MLAY600 and MLAY1000 are listed in multi-magnet versions (x2, x3 and x4) for longer loads. Check the data sheet for load ratings.
Do lifting magnets need inspection?
Lifting equipment should be inspected and tested as the manufacturer and your site procedures require. Contact us if you need help with data sheets.