Ravaglioli 3D Wheel Aligners, Tyre Changers, Vehicle Hoists & Wheel Balancers
Ravaglioli is an Italian automotive workshop equipment manufacturer with decades of engineering heritage in vehicle servicing technology — producing 3D wheel aligners, lever-less tyre changers, vehicle hoists, mid-rise scissor lifts, and electronic wheel balancers used by tyre retailers, independent automotive workshops, fleet service centres, automotive dealerships, and passenger vehicle servicing operations worldwide.
Italy has historically been the global centre of automotive workshop equipment engineering, and Ravaglioli sits within this tradition as a brand whose equipment is specified by high-throughput tyre and service workshops that demand accuracy, repeatability, and build quality sufficient for tens of thousands of vehicles over the equipment’s service life.
Their 3D wheel alignment systems are a particularly strong example of this engineering approach — second-generation machine vision technology acquires four-wheel alignment data automatically from camera targets on the wheel, eliminating the cable connections, manual target placement errors, and vehicle length limitations of older sensor-bar-and-cable systems.
In automotive workshop operations, alignment and balancing throughput directly affects daily revenue — a system that takes twenty minutes per vehicle instead of thirty produces a measurable increase in bay capacity and revenue without any increase in labour cost.
Ravaglioli’s production engineering focus on reducing measurement cycle time, eliminating manual data entry errors, and expanding the vehicle size range addressable from a single machine directly serves this commercial imperative. Their lever-less tyre changing range similarly addresses the increasing prevalence of low-profile, run-flat, and large-diameter SUV and 4WD tyres that require specialist toolhead geometry to fit and remove without rim flange damage — a growing source of warranty claims and customer dissatisfaction in workshops using conventional tyre levers on expensive alloy wheel equipment.
AIMS Industrial offers Ravaglioli automotive workshop equipment including 3D wheel alignment systems, lever-less tyre changing machines, vehicle scissor lifts, two-post and four-post vehicle hoists, and electronic wheel balancers.
Order your Ravaglioli equipment today.
Ravaglioli 3D Wheel Aligners & Lever-Less Tyre Changers
- Ravaglioli RAVTD3200SP.3 2nd Generation 3D Wheel Aligner: A second-generation 3D camera-based wheel aligner that uses machine vision targets on the wheel rim to acquire four-wheel alignment data without the wiring, cable management, and target handling of first-generation systems. The RAVTD3200SP.3 automates the data acquisition phase of the alignment process, reducing per-vehicle alignment time and eliminating manual measurement errors from incorrect cable tension or target positioning that affect first-generation aligner accuracy and repeatability.
- Ravaglioli RAVTD3200HPR.3 Premium 3D Wheel Aligner: The premium variant of the RAVTD3200 series with enhanced camera resolution and an extended measurement range for larger vehicle platforms including SUVs, vans, and light trucks with longer wheelbases and wider track widths than the standard passenger car measurement range addresses. The HPR.3 supports a broader vehicle database and provides simultaneous four-wheel caster, camber, toe, and thrust angle outputs to match the alignment specification requirements of current premium vehicle platforms.
- Ravaglioli G1250.30PLUSIT Lever-less Tyre Changer With Helper Arm & Wheel Lift: A lever-less tyre changer with integrated helper arm and powered wheel lift for fitting and removing tyres on alloy wheels without tyre levers that risk rim flange damage on expensive alloy and forged wheel equipment. The helper arm assists bead roller positioning on low-profile and stiff-sidewall tyres, and the powered wheel lift eliminates manual wheel-and-tyre lifting onto the turntable for the heavy SUV and 4WD assemblies that represent an increasing proportion of tyre workshop volume.
- Ravaglioli G8945ITV.26S Lever-less 26″ Tyre Changer: A heavy-duty lever-less tyre changer rated for wheels up to 26 inches in diameter, covering the full range of large-format 4WD, SUV, agricultural, and light truck tyres that have grown to represent a significant share of tyre workshop volume. The ITV series uses patented toolhead geometry to seat and unseat bead profiles across the rim diameter range without direct metal tool contact on the rim flange, eliminating alloy wheel damage risk across all wheel sizes within the machine’s rated range.
Ravaglioli Vehicle Hoists, Scissor Lifts & Wheel Balancers
Ravaglioli’s lifting and balancing range covers mid-rise scissor lifts for fast tyre rotations through to four-post wheel alignment hoists for complete vehicle servicing at the correct working height.
The electronic wheel balancers with automatic dimension measurement eliminate the manual gauge contact and data entry steps that consume a significant proportion of per-vehicle cycle time on conventional balancers, improving throughput without additional operator effort.
Together the hoist, alignment, and balancing range equips a complete automotive service bay from the AIMS Industrial catalogue — reducing procurement complexity for workshops setting up or upgrading a service bay.
- Ravaglioli RAV1450N 3.2T Mid-Rise Scissor Lift: A 3.2-tonne mid-rise scissor lift for wheel removal, brake servicing, tyre fitting, and underbody inspection at an intermediate working height accessible without full vehicle lifting. The mid-rise format provides clearance for wheel-end work without the full undercar access of a two-post hoist, offering a faster service cycle for tyre and brake jobs in high-throughput bays where full hoist elevation is not required for the task.
- Ravaglioli RAV535 3.5T Low Profile Full Rise Scissor Lift: A 3.5-tonne full-rise scissor lift with a low collapsed deck profile for installation in bays with limited pit depth or where floor-flush installation must be achieved without deep excavation. Full-rise capability provides complete undercar access height for exhaust, suspension, drivetrain, and brake system work that mid-rise scissor lifts cannot accommodate, while the low profile minimises the structural work required during installation.
- Ravaglioli KPX32 3.2T Baseless Screw 2-Post Electro-Mechanical Lift: A 3.2-tonne baseless two-post lift using screw drive columns rather than hydraulic cylinders, eliminating hydraulic seal failure risk and the floor oil contamination that hydraulic leaks cause in workshops with concrete slab floors. The baseless floor plate design mounts flush to the workshop slab without a structural base frame, suitable for workshops where embedded base frame anchoring is impractical or where the slab specification limits penetration depth.
- Ravaglioli 4.5T Electro-Hydraulic 2-Post Clear Floor Hoist With Long Arms: A 4.5-tonne electro-hydraulic two-post clear floor hoist with extended arm reach for lifting larger vehicles including SUVs, large vans, and light trucks that require longer arm extension to reach the vehicle manufacturer’s specified lift points from the post column positions. Clear floor between posts allows unobstructed vehicle entry from both directions and floor trolley positioning under the vehicle for drivetrain, exhaust, and suspension component extraction.
- Ravaglioli KPH370.45 4.5T Electro-Hydraulic 2-Post Clear Floor Hoist: The KPH370.45 series two-post hoist providing 4.5-tonne rated lifting capacity in a standard workshop bay footprint for servicing the full range of passenger vehicles and light commercials up to the rated capacity. Electro-hydraulic actuation provides smooth, controlled lifting with automatic hydraulic safety locks engaging at each stage of the lift cycle to prevent uncontrolled lowering in the event of hydraulic pressure loss during service operations.
- Ravaglioli RAV4402 4.0T 4-Post Wheel Alignment Hoist: A four-post wheel alignment hoist with integrated drive-on runways for performing four-wheel alignment with the vehicle in its normal loaded, on-wheel position as specified by vehicle manufacturers for accurate alignment measurement. Compatible with Ravaglioli 3D alignment systems for direct workflow integration between lifting and measuring within a single combined alignment hoist bay, eliminating the need for separate alignment pit infrastructure.
- Ravaglioli G4.140WS Wheel Balancer With Automatic Distance & Diameter Input: An electronic wheel balancer with automatic sonar distance measurement and rim diameter input, reducing the manual gauge measurements and data entry that account for a significant portion of per-vehicle cycle time on manual-input balancers. The G4.140WS eliminates the measurement errors from incorrect manual gauge positioning that cause incorrect balance weight placement and customer comebacks in high-volume tyre workshop environments.
- Ravaglioli G3.150WS Electronic Wheel Balancer With Laser Blade & Width Sonar: A premium electronic wheel balancer with laser rim profiling and sonar width measurement for fully automatic, non-contact wheel data acquisition without any manual gauge contact at the rim. The non-contact measurement cycle speed and the elimination of operator gauge-positioning technique variation make the G3.150WS the highest-throughput and most consistent balancer in the Ravaglioli range for high-volume tyre workshop production environments.
Shop Ravaglioli workshop equipment at AIMS Industrial alongside our range of Vehicle Hoists, and Workshop Equipment.
Order online, Contact our team for assistance or to Request a quote.