Buy Angle Grinder Accessories Online in Australia
Angle grinder accessories are the small parts that keep a grinder set up correctly: flanges, washers, thread adaptors, quick-change disc adaptors and a pin spanner. AIMS Industrial supplies Maxigear flanges and washers, Pferd Combidisc mounting adaptors, a Bordo thread adaptor set and an Abbott & Ashby adjustable pin spanner.
What's in the range
| Product | What the range includes |
|---|---|
| Maxigear flanges and washers | M14 x 2 flange, M14 x 2 bottom flange, M14 x 2 hard washer, an M14 x 2 flange, 3 pieces and a 10 x 1.5 mm flange. |
| Pferd Combidisc adaptors | For 4 inch grinders and for 4-1/2 and 5 inch grinders. |
| Bordo thread adaptor set | Adapts M10 x 1.25 and M10 x 1.5 threads to M14 x 2. |
| Abbott & Ashby adjustable pin spanner | Adjustable pin spanner for angle grinder lock nuts and flanges. |
Choosing the right accessory
Start with your grinder's spindle thread and disc size. M14 x 2 is a common spindle thread on angle grinders, and smaller grinders can use M10 threads, so check your grinder before you order flanges or adaptors. The Bordo set lets you adapt between those thread sizes. Pferd Combidisc adaptors fit Combidisc quick-change discs to your grinder, and they come in one size for 4 inch grinders and one for 4-1/2 and 5 inch grinders.
Worn, bent or cracked flanges can stop a disc running true, so replace them rather than reusing them. Always fit the guard and use discs rated for your grinder's speed.
Always check the data sheet. Confirm the thread, diameter and compatibility with your grinder and discs before ordering.
Related ranges
See angle grinders and accessories, cutting wheels, flap discs, grinding wheels and accessories, abrasives, Maxigear, Pferd, Bordo and Abbott & Ashby. Our Angle Grinder Guide covers types, sizes and safe use.
Order from AIMS Industrial
Not sure which part fits your grinder? Call us on (02) 9773 0122, contact our team or request a quote. We have supplied Australian industry since 1988 and can help you identify the right part.
Angle grinder accessories FAQs
What thread do angle grinders use?
M14 x 2 is a common spindle thread, and some smaller grinders use M10 threads. Check your grinder's spindle thread before ordering.
What does the Bordo thread adaptor do?
It adapts M10 x 1.25 and M10 x 1.5 threads to M14 x 2, so you can fit accessories with a different thread to your grinder. Check the data sheet for which way it adapts.
What is a Combidisc adaptor?
It mounts Pferd Combidisc quick-change discs on an angle grinder. We list one for 4 inch grinders and one for 4-1/2 and 5 inch grinders.
Do I need a pin spanner?
Standard lock nuts need a pin spanner or the spanner that came with your grinder to tighten and loosen them. We list an adjustable pin spanner that suits a range of grinders.
When should I replace flanges?
Replace them when they are worn, bent, cracked or no longer hold the disc flat and true.