Buy Drilling & Engineer's Hammers Online in Australia
Drilling + Engineer's Hammer Selection — Quick Reference
Drilling + engineer's hammers — HEAVY-DUTY HAND-HELD striking hammers for COLD CHISEL + masonry + structural + steel work. Heavier than ball-pein for SUSTAINED HEAVY STRIKE. Workshop + construction + steel fabrication. AS/NZS 4024 machinery safety.
| Engineer's Hammer Type | Best For |
|---|---|
| Drilling Hammer (1kg / 2kg) | Cold chisel + masonry striking |
| Engineer's Ball-Pein (1-2kg) | Heavy bench engineer work |
| Cross-Pein Engineer | Specialty bench work |
| Club Hammer (Lump Hammer) | Heavy striking + demolition |
| Fibreglass Handle | Reduced shock + workshop standard |
| Wood Handle (Hickory) | Traditional + replaceable |
| Steel Tubular Handle | Heavy-duty + replaceable |
| Rubber Grip | Comfort + workshop |
Critical: PPE — eye + face protection mandatory. Inspect HEAD + HANDLE for cracks. Replace damaged. Brands: Nupla, Thor, Bahco. Companion: hammers, ball-pein hammers, picks + chipping hammers, hand tools.
Drilling & Engineer's Hammers: Cross Pein & Straight Pein Tools
The engineer's hammer—or drilling hammer, or club hammer—comes in two flavours: cross pein (for marking and chasing) and straight pein (for general striking). Used by engineers, metalworkers, and tradespeople for decades, these traditional tools remain essential.
Cross Pein Hammers
- Wedge-shaped peen: Perpendicular to the handle, good for marking and line-chasing
- Uses: Centre-popping, scribe marking, light chiselling
- Weights: Typically 100 g to 900 g
Straight Pein Hammers
- Peen parallel to handle: For sliding strikes along a chisel or punch
- Uses: Punch driving, cold chiselling, controlled striking
- Weights: 225 g to 1.5 kg+
Club Hammers
- Heavy head on short handle: Short reach, maximum impact
- Straight or cross peen: Depending on the job
- Common uses: Heavy drilling, breaching, demolition work
Handle Materials
- Fibreglass: Low maintenance, all-weather
- Hickory: Traditional, natural feel, requires oiling
Who Uses These?
Engineers, toolmakers, blacksmiths, tradespeople, maintenance teams—anyone who needs a hammer that doesn't have a rounding flat face and isn't specialised to just one job.
AIMS Industrial: Australian supplies since 1988. contact our team for engineer's hammer advice.
People Also Ask — Drilling & Engineer's Hammers
Q: Cross pein or straight pein hammer — what's the difference?
A cross pein has a wedge-shaped peen perpendicular to the handle, suited to centre-popping, scribe marking and light chiselling, typically 100g to 900g. A straight pein has its peen parallel to the handle for sliding strikes along a chisel or punch — used for punch driving and cold chiselling, typically 225g to 1.5kg or heavier.
Q: What's a club hammer (lump hammer) best for?
A club hammer puts a heavy head on a short handle for maximum impact at close reach, in either a straight or cross peen depending on the job. It's the go-to for heavy drilling, breaching and demolition work rather than precision striking.
Q: Fibreglass or hickory handle — which should I choose?
Fibreglass is low maintenance and copes with all-weather use without extra care. Hickory is the traditional choice, with a natural feel many tradespeople prefer, but it requires periodic oiling to stay in good condition.
Q: Who actually uses drilling and engineer's hammers?
Engineers, toolmakers, blacksmiths, tradespeople and maintenance teams — essentially anyone who needs a hammer that isn't a rounding flat-faced hammer specialised to just one job, and can instead handle cold chisel, masonry and general heavy striking work.
Q: What weight engineer's hammer do I actually need?
It depends on the pein type and the job: cross pein hammers typically run 100g to 900g for marking and light chiselling work, while straight pein hammers run 225g up to 1.5kg or more for punch driving and cold chiselling — match the weight to the striking task, not just the brand.