Buy Masonry Screw Anchors Online in Australia
Masonry screw anchors are screwed directly into a pre-drilled hole in masonry, without a separate sleeve or expansion plug. AIMS Industrial lists Hobson Xbolt masonry screws in hex flange, countersunk and Torx dome head styles, Xbolt eye and coupler screw anchors, the TX-CON hex slotted anchor screw, and Bremick hexagonal head screw anchors, in zinc yellow, zinc plated and galvanised finishes.
What's in the range
| Product | What is listed |
|---|---|
| Hobson Xbolt masonry screws | Hex flange head (zinc yellow, M5, and mechanical galvanised, M6), countersunk head (zinc yellow and mechanical galvanised, M6) and Torx drive dome head (mechanical galvanised, M6). |
| Hobson Xbolt eye | Masonry Xbolt eye, zinc yellow passivate, M8 and M10. |
| Hobson Xbolt coupler screw anchors | Mechanical galvanised and zinc yellow passivate, 100mm and 150mm. |
| Hobson TX-CON | Hex slotted anchor screw, R1000 coating. |
| Bremick screw anchors | Hexagonal head, M10, in galvanised and zinc plated. |
Choosing a masonry screw anchor
Choose the head style for the job: hex flange or hex head for a spanner or socket, countersunk where the screw must sit flush, and Torx drive dome head where you use a Torx bit. Match the thread size and length to the fixture and the depth of the base material. Choose the finish for the environment, such as zinc plated or yellow for dry indoor use and galvanised where there is more moisture. Drill the hole to the diameter given on the data sheet.
Always check the data sheet. Confirm the hole size, embedment depth and load rating before you order, and confirm it suits the base material.
Related ranges
See concrete screws, anchors, wall screw anchors and masonry drill bits. Brands: Hobson and Bremick.
Order from AIMS Industrial
Not sure which anchor suits your base material? Call us on (02) 9773 0122, contact our team or request a quote. We have supplied Australian industry since 1988 and can help you choose.
Masonry screw anchor FAQs
What is a masonry screw anchor?
A screw that cuts its own thread into a pre-drilled hole in masonry, so no separate sleeve or plug is needed.
What head styles do you list?
Hex flange, countersunk, Torx drive dome head, hexagonal head and hex slotted.
What finishes are available?
Zinc yellow, zinc yellow passivate, zinc plated, mechanical galvanised and galvanised, depending on the product.
What drill bit do I need?
Use the hole diameter on the manufacturer's data sheet for the screw size. See our masonry drill bits.