Lockjaw L2140275 330mm Swivel Pad C-Clamp, 80mm

The Lockjaw swivel pad locking C-clamps come in two sizes: the 230mm L2140175 with a 63mm jaw opening, and the 330mm L2140275 with an 80mm jaw opening. The wide opening jaws have swivel pads, which allow parallel clamping and prevent denting or gouging on delicate surfaces. They suit fabricators, welders, panel workers and maintenance fitters. A locking C-clamp is a locking plier built in a C shape. It holds work like a clamp, hands free, until you squeeze the release lever.

Ordinary locking pliers need two hands to set the jaw opening for each job. Lockjaw pliers adjust themselves: set the clamp pressure once with the Set and Forget screw, from slight to extreme, and the jaws then close on thick or thin work with the same grip, one-handed. To choose: pick 230mm for general work and 330mm for a wider opening and more reach. If you do not need swivel pads, see the C-clamps L2130175 and L2130275.

Where this product is used

• Clamping work without marking or denting the surface
• Holding work flat on angled surfaces
• Hands-free holding while you weld, drill or assemble

Features

• Two sizes: 230mm with a 63mm jaw opening and 330mm with an 80mm jaw opening
• Swivel pads allow parallel clamping and prevent denting or gouging on delicate surfaces
• Wide opening jaws
• Jaws lock automatically with the highest tip pressure, with no adjusting needed
• Set and Forget pressure control sets the clamp pressure from slight to extreme
• Chrome Vanadium steel for durability and rust prevention
• 15% thinner handle for easier grip and more power
• No pinch, easy squeeze release lever stays locked until you release it

Key specifications

Choosing the right option