Lockjaw L2150480 455mm Extended Reach C-Clamp

The Lockjaw extended reach locking C-clamps come in two sizes: the 290mm L2170250 with a 112mm jaw opening, and the 455mm L2150480 with a 220mm jaw opening. Both have a deeper throat for extra reach, so they hold larger panels, frames and fabrications. They suit fabricators, welders and maintenance crews. A locking C-clamp is a locking plier built in a C shape. It holds work like a clamp, hands free, until you squeeze the release lever.

Ordinary locking pliers need two hands to set the jaw opening for each job. Lockjaw pliers adjust themselves: set the clamp pressure once with the Set and Forget screw, from slight to extreme, and the jaws then close on thick or thin work with the same grip, one-handed. To choose: pick 290mm for general fabrication reach and 455mm when you need to reach deep into large work. For clamps with swivel pads, see the 290mm L2180250 and the 455mm L2160480.

Where this product is used

• Clamping large panels, frames and fabrications with extra reach
• Hands-free holding while you weld, drill or assemble

Features

• Two sizes: 290mm with a 112mm jaw opening and 455mm with a 220mm jaw opening
• Deeper throat for extra reach
• Jaws lock automatically with the highest tip pressure, with no adjusting needed
• Set and Forget pressure control sets the clamp pressure from slight to extreme
• Chrome Vanadium steel for durability and rust prevention
• 15% thinner handle for easier grip and more power
• No pinch, easy squeeze release lever stays locked until you release it

Key specifications

Choosing the right option