Stenco 1M V Belt Pulley, 2 in, M Section, 1/2 in Pilot Bore | AIMS Industrial

The Stenco 1M is a single groove V belt pulley for M section belts. It has a nominal size of 2 in (50.8 mm) and a 1/2 in (12.7 mm) pilot bore, so it can be fitted as supplied or machined out to suit your shaft.

It is die-cast aluminium, made in Australia. Stenco pulleys are also made in A, B and C sections, in single and double groove, and in pilot bore, bored and keyed, and taper lock designs.

Where this product is used

• V belt drives on small machinery, motors, fans and small pumps
• Replacement pulleys for workshop and benchtop machines
• Custom drives where the pilot bore is machined and keyed to suit the shaft

Features

• Single groove pulley for M section V belts
• Nominal size 2 in (50.8 mm)
• 1/2 in (12.7 mm) pilot bore, to use as supplied or machine to suit the shaft
• Die-cast aluminium
• Made in Australia

Key specifications

Selecting and fitting

Check that the pulley section matches your belt: this is an M section pulley. If you machine the pilot bore, check that your shaft size leaves enough wall thickness around the bore.

Dimensions are as listed by AIMS and are for reference. Contact AIMS to confirm a measurement if it is critical to your application.