AAP Galvanised Malleable Iron Flange, 2" (drilled)
Available
This AAP galvanised malleable iron flange is a hot dip galvanised fitting with BSP threads. It is supplied in 19 size and type combinations, 1/2" (15mm) to 6" (150mm). A threaded flange plate screws onto a male threaded pipe to give a flat mounting face, for example to fix a pipe to a wall, floor or frame. It is made to BS 10 Table D in two forms: undrilled, and drilled with four holes as drawn.
These fittings are made to EN 10242:1994, in blackheart malleable cast iron and delivered hot dip galvanised. Each fitting is pressure tested to EN 10242 at a minimum hydrostatic pressure of 2068 kPa (equivalent to a minimum pneumatic pressure of 500 kPa) without leakage. Recommended maximum working pressure is 1379 kPa for water and 1034 kPa for gas, steam and compressed air. Working pressures may also be limited by pressure piping codes or industry regulations.
Where this product is used
- Fixing a threaded pipe to a wall, floor or frame
- Mounting a pipe end or fitting on a flat surface
- General galvanised threaded pipework
Features
- 19 size and type combinations, 1/2" (15mm) to 6" (150mm)
- Malleable iron, hot dip galvanised, EN 10242:1994
- BSP threads
- Test pressure 2068 kPa
Key specifications
| Specification | Detail |
|---|---|
| Brand | AAP |
| Product | Galvanised malleable iron flange |
| Finish | Hot dip galvanised, as prescribed by EN 10242 |
| Material | Blackheart malleable cast iron to ASTM A197 and ASTM A47, hot dip galvanised |
| Thread | BSP (British Standard Pipe) thread: parallel internal (Rp) and taper external (R), cut to AS 1722.1 and ISO 7-1 |
| Ends | Female (internal) thread, flat plate |
| Drilling | Undrilled, or drilled with four holes as drawn, as for each size |
| Applicable standard | EN 10242:1994, threaded pipe fittings in malleable cast iron |
| Recommended working pressure | 1379 kPa water, 1034 kPa gas, steam and compressed air |
| Test pressure | 2068 kPa hydrostatic (equivalent to 500 kPa pneumatic minimum) |
| Sizes | 1/2" (15mm) to 6" (150mm) (19 variants) |
Choosing the right option
Choose the size to match your pipework. These fittings are BSP threaded, so check that your pipe or fitting is BSP and not NPT before you order. Each size comes undrilled and drilled, so check which you need.
Related AAP products: AAP Galvanised Malleable Iron Oval Flange, AAP Galvanised Malleable Iron Socket, AAP Galvanised Malleable Iron Cap, AAP Galvanised Malleable Iron Square Head Plug.
| Option | Part number | SKU |
|---|---|---|
| 1/2" (undrilled) | LF15 | A0076938 |
| 1" (undrilled) | LF25 | A0076940 |
| 1-1/4" (undrilled) | LF32 | A0076941 |
| 1-1/2" (undrilled) | LF40 | A0076942 |
| 2" (undrilled) | LF50 | A0076943 |
| 2-1/2" (undrilled) | LF65 | A0076944 |
| 3/4" (undrilled) | LF20 | A0076939 |
| 3" (undrilled) | LF80 | A0076945 |
| 4" (undrilled) | LF94 | A0076946 |
| 4" (drilled) | LFD94 | A0076955 |
| 6" (drilled) | LFD96 | A0076956 |
| 1/2" (drilled) | LFD15 | A0076947 |
| 3/4" (drilled) | LFD20 | A0076948 |
| 1" (drilled) | LFD25 | A0076949 |
| 1-1/4" (drilled) | LFD32 | A0076950 |
| 1-1/2" (drilled) | LFD40 | A0076951 |
| 2" (drilled) | LFD50 | A0076952 |
| 2-1/2" (drilled) | LFD65 | A0076953 |
| 3" (drilled) | LFD80 | A0076954 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
AAP Galvanised Malleable Iron Flange, BS 10 Table D, Drilled and Undrilled: 2" (drilled)
SKU: A0076952 | Model: LFD50
AAP LFD50: AAP Galvanised Malleable Iron Flange, 2" (drilled). Pipe Size (inch): 2. Pipe Size (mm): 50. Type: drilled.
