AAP Galvanised Malleable Iron Socket, 1-1/4"

This AAP galvanised malleable iron socket is a hot dip galvanised fitting with BSP threads. It is supplied in 13 sizes, 1/8" (6mm) to 6" (150mm). A socket (also called a coupling) joins two male threaded pipes or fittings of the same size. It is threaded inside at both ends.

These fittings are made to EN 10242:1994, in blackheart malleable cast iron and delivered hot dip galvanised. Each fitting is pressure tested to EN 10242 at a minimum hydrostatic pressure of 2068 kPa (equivalent to a minimum pneumatic pressure of 500 kPa) without leakage. Recommended maximum working pressure is 1379 kPa for water and 1034 kPa for gas, steam and compressed air. Working pressures may also be limited by pressure piping codes or industry regulations.

Where this product is used

• Joining two male threaded pipes of the same size
• Extending a galvanised threaded pipe run
• Water, gas, steam and compressed air lines within the rated pressure and temperature

Features

• 13 sizes, 1/8" (6mm) to 6" (150mm)
• Malleable iron, hot dip galvanised, EN 10242:1994
• BSP threads
• Test pressure 2068 kPa

Key specifications

Choosing the right option

Choose the size to match your pipework. These fittings are BSP threaded, so check that your pipe or fitting is BSP and not NPT before you order.

Related AAP products: AAP Galvanised Malleable Iron Reducing Socket, AAP Galvanised Malleable Iron Hexagon Nipple, AAP Galvanised Malleable Iron Cap, AAP Galvanised Malleable Iron Square Head Plug.