Alpha TCT annular cutters, diameter (mm) 16

The Alpha Carbide Xtra TCT annular cutter is a tungsten carbide tipped hole cutter with a 50mm depth of cut and a Multi-Fit one touch shank for magnetic drills. There are 20 diameters from 14mm to 50mm.

The cutting teeth are made with Sandvik tungsten carbide, and the Multi-Fit shank suits quick-change magnet-based drills and standard 19.05mm Weldon shanks. The steel and stainless steel are the materials.

Where this product is used

• Cutting holes in structural steel plate and sections with a magnetic drill
• Fabrication and maintenance holes in stainless steel
• Cutting through-holes in material up to 50mm thick

Features

• Tungsten carbide tipped, made with Sandvik tungsten carbide
• 14mm to 50mm diameters, each with a 50mm depth of cut
• Multi-Fit one touch shank suits quick-change magnet-based drills
• Separate ejection pins come in these cutters

Key specifications

Choosing the right option

Choose the diameter you need to cut, then check that your magnetic drill takes the Multi-Fit one touch shank or a 19.05mm Weldon shank. For tapping the hole afterwards see the Alpha mag drill tapping chuck, and for cutting lubricant see Alpha Liquid Gold cutting fluid.

See also the: Alpha Mag Drill Tapping Chuck, M9 to M18, MT2 Taper, Alpha Liquid Gold Cutting Fluid, Water Soluble, 250ml Squeeze Bottle.