Koyo/JTEKT 7000 Angular Contact Ball Bearing 10 x 26 x 8mm
Regular price
$66.81
Sale price
$66.81
Regular price
Inc. GST
Available
Koyo/JTEKT 7000. Combined radial + axial load capacity. Open: low-friction open type. Used in pairs for bi-directional thrust. Koyo/JTEKT Angular Contact Ball Bearing (7000-7300 Series) handles combined radial and axial loads, typically used in matched pairs.
Type: Angular contact ball bearing. Sealing: Open. Load: Combined radial + single-direction axial.
Available Sizes
16 sizes available — select the exact size you need from the dropdown above. Key figures for each:
| Bore Diameter x Outer Diameter x Width (mm) | Basic Load Rating (kn) W/ Machine Cage Cr | Basic Load Rating (kn) W/ Machine Cage C0r | Limiting Speed 1) (min-1) Oil lub. |
|---|---|---|---|
| 10 x 26 x 8 | 6.25 | 2.35 | 42000 |
| 12 x 28 x 8 | 6.75 | 2.75 | 37000 |
| 15 x 32 x 9 | 7.65 | 3.45 | 32000 |
| 20 x 42 x 12 | 12.9 | 6.1 | 24000 |
| 25 x 47 x 12 | 14.1 | 7.4 | 21000 |
| 30 x 55 x 13 | 18.2 | 10.1 | 18000 |
| 35 x 62 x 14 | 21.9 | 12.6 | 15000 |
| 40 x 68 x 15 | 23.4 | 14.6 | 14000 |
| 45 x 75 x 16 | 27.8 | 17.7 | 12000 |
| 50 x 80 x 16 | 29.5 | 20.1 | 11000 |
| 55 x 90 x 18 | 38.9 | 26.3 | 10000 |
| 60 x 95 x 18 | 39.9 | 28.1 | 9700 |
| 65 x 100 x 18 | 42.1 | 31.4 | 9000 |
| 70 x 110 x 20 | 53.3 | 39.4 | 8300 |
| 90 x 140 x 24 | 81.5 | 63.3 | 6400 |
| 100 x 150 x 24 | 85.5 | 70.6 | 5900 |
Where This Is Used
- Automotive: Front wheel bearings, transmissions, differential pinion shaft.
- Electrical: High frequency motors.
- Industrial Equipment: Machine tool spindles, pumps, gas turbines, centrifugal separators, and Printing equipment.
Features
- Features Deep Groove Radial Bearing.
- The contact angle between the bearing balls and rings is normally 15, 30, or 40 degrees.
- The larger contact angle bearings have greater thrust load capacity.
- Single row bearings can accommodate radial load and axial load in one direction only.
- Double row matched bearings can accommodate radial load and axial load in either direction.
- The DT double tandem arrangement should be used for higher axial loads.
- Angular contact bearings can provide a high degree of accuracy and are capable of running at high speed.
- Cages can be pressed steel, machined copper alloy, molded polyamide, and machined synthetic resin.
Full engineering specifications (all 15 fields, 16 sizes)
| Bearing Width B (mm) | Bore Diameter x Outer Diameter x Width (mm) | Boundary Dimension (mm) r1 min. | Limiting Speed 1) (min-1) Oil lub. | Basic Load Rating (kn) W/ Machine Cage C0r | Basic Load Rating (kn) W/ Machine Cage Cr | Outside Diameter D (mm) | Bore Diameter d (mm) | Load Center (mm) A | Mounting Dimension (mm) Ra Max. | Mounting Dimension (mm) Da Min. | Limiting Speed 1) (min-1) Grease lub. | Fatigue Load Limits (kn) Cu With Machine Cage | Mounting Dimension (mm) Da Max. | Boundary Dimension (mm) r min. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 10 x 26 x 8 | 0.15 | 42000 | 2.35 | 6.25 | 26 | 10 | 9.1 | 0.3 | 12.5 | 34000 | 0.12 | 23.5 | 0.3 |
| 8 | 12 x 28 x 8 | 0.15 | 37000 | 2.75 | 6.75 | 28 | 12 | 9.9 | 0.3 | 14.5 | 29000 | 0.14 | 25.5 | 0.3 |
| 9 | 15 x 32 x 9 | 0.15 | 32000 | 3.45 | 7.65 | 32 | 15 | 11.3 | 0.3 | 17.5 | 26000 | 0.18 | 29.5 | 0.3 |
| 12 | 20 x 42 x 12 | 0.3 | 24000 | 6.1 | 12.9 | 42 | 20 | 15.1 | 0.6 | 24.5 | 19000 | 0.39 | 37.5 | 0.6 |
| 12 | 25 x 47 x 12 | 0.3 | 21000 | 7.4 | 14.1 | 47 | 25 | 16.4 | 0.6 | 29.5 | 17000 | 0.45 | 42.5 | 0.6 |
| 13 | 30 x 55 x 13 | 0.6 | 18000 | 10.1 | 18.2 | 55 | 30 | 18.8 | 1 | 35.5 | 14000 | 0.61 | 49.5 | 1 |
| 14 | 35 x 62 x 14 | 0.6 | 15000 | 12.6 | 21.9 | 62 | 35 | 21.2 | 1 | 40.5 | 12000 | 0.74 | 56.5 | 1 |
| 15 | 40 x 68 x 15 | 0.6 | 14000 | 14.6 | 23.4 | 68 | 40 | 23.2 | 1 | 45.5 | 11000 | 0.83 | 62.5 | 1 |
| 16 | 45 x 75 x 16 | 0.6 | 12000 | 17.7 | 27.8 | 75 | 45 | 25.3 | 1 | 50.5 | 10000 | 1 | 69.5 | 1 |
| 16 | 50 x 80 x 16 | 0.6 | 11000 | 20.1 | 29.5 | 80 | 50 | 26.9 | 1 | 55.5 | 9200 | 1.1 | 74.5 | 1 |
| 18 | 55 x 90 x 18 | 0.6 | 10000 | 26.3 | 38.9 | 90 | 55 | 29.9 | 1 | 62 | 8300 | 1.5 | 83 | 1.1 |
| 18 | 60 x 95 x 18 | 0.6 | 9700 | 28.1 | 39.9 | 95 | 60 | 31.4 | 1 | 67 | 7700 | 1.55 | 88 | 1.1 |
| 18 | 65 x 100 x 18 | 0.6 | 9000 | 31.4 | 42.1 | 100 | 65 | 33 | 1 | 72 | 7200 | 1.7 | 93 | 1.1 |
| 20 | 70 x 110 x 20 | 0.6 | 8300 | 39.4 | 53.3 | 110 | 70 | 36 | 1 | 77 | 6600 | 2.15 | 103 | 1.1 |
| 24 | 90 x 140 x 24 | 1 | 6400 | 63.3 | 81.5 | 140 | 90 | 45.2 | 1.5 | 98.5 | 5100 | 3.25 | 131.5 | 1.5 |
| 24 | 100 x 150 x 24 | 1 | 5900 | 70.6 | 85.5 | 150 | 100 | 48.1 | 1.5 | 108.5 | 4700 | 3.35 | 141.5 | 1.5 |
Product Highlights
Couldn't load pickup availability
Payment & Security
Payment methods
Secure Checkout. We do not store credit card details
Available Options:
-
10 x 26 x 8mm bearing
Model Number: 7000/KOYO
-
12 x 28 x 8mm bearing
Model Number: 7001/KOYO
-
15 x 32 x 9mm bearing
Model Number: 7002/KOYO
-
20 x 42 x 12mm bearing
Model Number: 7004/KOYO
-
25 x 47 x 12mm bearing
Model Number: 7005/KOYO
-
30 x 55 x 13mm bearing
Model Number: 7006/KOYO
-
35 x 62 x 14mm bearing
Model Number: 7007/KOYO
-
40 x 68 x 15mm bearing
Model Number: 7008/KOYO
-
45 x 75 x 16mm bearing
Model Number: 7009/KOYO
-
50 x 80 x 16mm bearing
Model Number: 7010/KOYO
-
55 x 90 x 18mm bearing
Model Number: 7011/KOYO
-
60 x 95 x 18mm bearing
Model Number: 7012/KOYO
-
65 x 100 x 18mm bearing
Model Number: 7013/KOYO
-
70 x 110 x 20mm bearing
Model Number: 7014/KOYO
-
90 x 140 x 24mm bearing
Model Number: 7018/KOYO
-
100 x 150 x 24mm bearing
Model Number: 7020/KOYO
