Brady B30C-2500-509-WT B-509 Magnetic Polyester Label Tape, White, 63.5 mm x 7.62 m

Brady B-509 is a non-adhesive magnetic polyester tape for B30 series printers. It holds to steel and other ferromagnetic surfaces, so labels can be moved or taken down without residue. This listing has four 7.62 m (25 ft) cartridges: 63.5 mm and 107.95 mm wide, each in white and yellow (manufacturer-stated).

B-509 is a matte magnetic polyester 0.46 mm (0.018 in) thick. Brady quotes a service temperature of -18 to 70 °C, an average outdoor durability of 3 to 5 years, and says it withstands moderate heat, mild chemicals, oil and water (manufacturer-stated). Brady lists the tape as abrasion and chemical resistant and gives B30-R10000 as the ribbon (manufacturer-stated). It only holds to ferromagnetic surfaces such as steel shelving and racking, not to aluminium, plastic or timber, so test a sample on your own surface for holding strength. Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Facility, shelf, rack and bin identification on steel (manufacturer-stated).
• Safety identification and general identification (manufacturer-stated).
• Labels that are moved often, such as stock locations, work-in-progress and tooling.

Features

• Non-adhesive magnetic polyester for ferromagnetic surfaces (manufacturer-stated)
• Service temperature -18 to 70 °C (manufacturer-stated)
• Average outdoor durability 3 to 5 years (manufacturer-stated)
• Withstands moderate heat, mild chemicals, oil and water (manufacturer-stated)
• Abrasion and chemical resistant (manufacturer-stated)
• Two widths in white and yellow, each with its own product code

Common specifications

Key specifications

Selecting the right option

Choose the width to suit the label you need to print: 63.5 mm for shelf and bin edges and 107.95 mm for larger signs and racking labels. Choose white or yellow to suit the contrast you need. The ribbon is sold separately: see the B30 series printer ribbons. For labels that stick permanently see the B-549 cold temperature label tape and the B-581 repositionable vinyl label tape.

Related products

Related Brady products: B30 series printer ribbons, B-581 repositionable vinyl label tape, B-549 cold temperature label tape and B-584 reflective label tape for B30 printers.