Brady B30C-1125-584-OR B-584 Retroreflective Label Tape, Orange, 28.58 mm x 15.24 m

Brady B-584 is a retroreflective tape that you print on a B30 series printer, so job-site tools, hard hats, enclosures, poles and racking can be identified in a form that reflects light. This listing has nine 15.24 m (50 ft) cartridges: 28.58 mm, 57.15 mm and 101.6 mm wide, each in silver, yellow and orange (manufacturer-stated).

B-584 is a gloss tape 0.14 mm (0.0055 in) thick with a permanent acrylic adhesive. Brady quotes a service temperature of -40 to 70 °C, a minimum application temperature of 10 °C, an average outdoor durability of 4 to 6 years, and lists it as abrasion and chemical resistant (manufacturer-stated). Brady states that the sheeting and adhesive meet Federal Spec L-S-300 for reflectivity (manufacturer-stated). That is a US federal specification, and Brady does not publish a retroreflectivity value on the product page, so ask us if your job needs a stated reflectivity level. Brady lists B30-R10000 as the ribbon (manufacturer-stated). Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Job site tools, hard hats, utility enclosures, poles and pedestals (manufacturer-stated).
• Rooftop equipment, racks and shelves (manufacturer-stated).
• Component and equipment labelling, facility identification and safety identification (manufacturer-stated).

Features

• Retroreflective sheeting with permanent acrylic adhesive (manufacturer-stated)
• Average outdoor durability 4 to 6 years (manufacturer-stated)
• Service temperature -40 to 70 °C (manufacturer-stated)
• Abrasion and chemical resistant (manufacturer-stated)
• Meets Federal Spec L-S-300 for reflectivity (US) (manufacturer-stated)
• Three widths in silver, yellow and orange, each with its own product code

Common specifications

Key specifications

Selecting the right option

Choose the width to suit the surface: 28.58 mm for tool handles, hard hats and small enclosures and 101.6 mm for poles, racking and rooftop equipment. Silver, yellow and orange are listed separately, so match the colour to your site marking scheme. Apply at 10 °C or above. The ribbon is sold separately: see the B30 series printer ribbons. For reflective tape on the M4 and M5 printers see the B-584 reflective tape for M4 and M5 printers.

Related products

Related Brady products: B30 series printer ribbons, B-584 reflective tape for M4 and M5 printers, B-581 repositionable vinyl label tape and B-549 cold temperature label tape.