Brady 872429 ToughStripe Floor Marking Tape (B-514), 51 mm x 30 m, Black

Brady ToughStripe is a rugged polyester floor marking tape with an ultra aggressive adhesive and a high-gloss surface, on a 30 m roll. This listing has 23 rolls in three widths (51, 76 and 100 mm) and 10 colours and stripes: black, black/white, black/yellow, blue, green, orange, red, red/white, white and yellow. Each width comes in some colours only, so use the table to match a colour to a width (manufacturer-stated).

Brady says the tape holds up against forklift traffic without tearing or lifting, and suggests it for marking aisles, passageways and storage locations and identifying equipment and egress paths (manufacturer-stated). Brady's Australian page names the material B-514 polyester. Brady's B-514 data sheet adds a thickness of 0.20 mm (0.008 in), a permanent rubber based adhesive, a service temperature from -18 to 60 °C, a minimum application temperature of 10 °C and says outdoor use is not recommended (manufacturer-stated).

This is the plain polyester roll for floors, not the ToughStripe tape you print on a B30 printer, which is the Brady ToughStripe floor marking tape for B30 printers. Brady lists no slip rating or standard for this tape. Brady's Australian pages give 50 and 75 mm in some product titles and 51 and 76 mm in the specification tables, so 51 and 76 mm are used here. The Product Code is Brady's ordering number for each roll (Brady prints no separate part number). Check that the product suits your surface, traffic and site conditions before you apply it.

Where this product is used

• Marking aisles, passageways and storage locations (manufacturer-stated).
• Identifying equipment and egress paths (manufacturer-stated).
• Colour-coded floor zones, including striped warning and hazard markings.

Features

• Rugged polyester with an ultra aggressive adhesive (manufacturer-stated)
• High-gloss surface that withstands forklift traffic without tearing or lifting (manufacturer-stated)
• 0.20 mm thick; service temperature -18 to 60 °C (Brady data sheet) (manufacturer-stated)
• 30 m rolls in 51, 76 and 100 mm widths (manufacturer-stated)
• 10 colours and stripes
• Indoor use; outdoor use not recommended (Brady data sheet) (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the width and colour or stripe from the table: 100 mm is available in orange, red and yellow only. For vinyl rolls see the Brady aisle marking tape, for printable tape for a B30 printer the Brady ToughStripe floor marking tape for B30 printers, and for hazard stripes with a reflective finish the Brady reflective warning tape. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: Brady ToughStripe floor marking tape for B30 printers, Brady aisle marking tape, Brady indoor warning tape, Brady reflective warning tape and Brady ToughStripe floor marking tape.