Seco XOMX120408TR-D14 MP3000 Milling Insert
The price shown is for the pack.
Available
Genuine Seco Carbide PVD (D14) Turbo 12 Square Shoulder Milling Insert.
Key Specifications
| Grade | F30M |
|---|---|
| Additional Details | F30M grade, carbide PVD. PVD (Physical Vapour Deposition). PVD coated grades are recommended for applications with low feed rates where high edge toughness is required. PVD-coated grades are suitable for applications with low to intermediate cutting speed. |
F30M Grade
Basic grade for Minimaster inserts and thread milling inserts. Also suitable for milling stainless steel, hardened steel, and superalloys. (Ti, Al) N – TiN
About Turbo Square Shoulder Milling
Aggressively optimize your cutting properties with Seco’s Turbo family of cutters that reduce heat generation and cutting forces. These cutters are available in a variety of configurations, all with copy milled pockets for insert stability and two pitch configurations to tackle almost every material. Maximize output in a wide range of applications including; roughing, semi-finishing, finishing. Methods include all facing, slotting, profiling contouring, helical interpolation, ramping, and plunging applications.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Carbide PVD (D14) Turbo 12 Square Shoulder Milling Insert: XOMX120408TR-D14 MP3000
SKU: A0118868 | Model: 02656232
Seco 11.6 x 5.07mm MP3000 1° Chamfer Mill Turbo 12 Milling Insert XOMX120408TR-D14,MP3000 Pack of 10
Carbide PVD (D14) Chamfer Mill Turbo 12 Milling Insert
MP3000 grade, carbide PVD.
PVD (Physical Vapour Deposition).
PVD coated grades are recommended for applications with low feed rates where high edge toughness is required.
PVD-coated grades are suitable for applications with low to intermediate cutting speed.
MP3000 Grade
Highly wear-resistant optimized grade for milling in steel.
About Chamfer Turbo 12 2-Cutting-Edge-Single-Sided Inserts
Available in Arbor, CombimasterTM and Seco-Capto connections.
30°, 45°, 60°, and 75° setting angles.
Max. depth of cut 31 mm (1.22 inch) with the 75° milling cutter.
XO.X12 inserts with 2 cutting edges.
Front chamfering.
About Seco Chamfer Mills
Seco chamfer mills offer the same free cutting action as our standard milling cutters, providing strong and reliable performance.
With options for through-coolant and 30-degree, 45-degree, 60-degree and 75-degree setting angles.
Our family of chamfer mills is available with Combimaster™, Arbor and Seco-Capto connections.


