CRC ADOS Multi-Purpose Spray Adhesive 210ml Aerosol
Available
CRC ADOS Multi-Purpose Spray Adhesive is a solvent-based, pressure-sensitive one-way spray adhesive in an aerosol. It is a white foam that dries clear, with low soak and fast tack-off.
It remains repositionable for 1-2 minutes from first contact. Once positioned it bonds within 10-20 minutes and takes 24 hours to cure fully. Do not use it where heat-resistant or immersed-in-water bonds are required. It is classed as an extremely flammable aerosol.
Where this product is used
- Paper, cardboard, cloth and fabrics
- Leather, carpet, felt and cork
- PVC foam, polystyrene, foils and some rubbers
- Labelling, photo mounting and sailcloth
- Fibreglass
- Wood and metal when bonding dissimilar materials
Features
- Pressure-sensitive one-way spray adhesive
- Repositionable for 1-2 minutes from first contact
- Bonds within 10-20 minutes once positioned, full cure takes 24 hours
- White foam that dries clear, with low soak
- Non staining and low mist
- Aerosol, so there is no equipment to clean up
- Temperature range up to 40°C
Key specifications
| Specification | Detail |
|---|---|
| Brand | CRC |
| Product type | Solvent-based, pressure-sensitive one-way spray adhesive, aerosol |
| CRC product number | 8015 (210ml), 8017 (575ml) |
| Colour | White foam, dries clear |
| Appearance | Viscous opaque liquid (aerosol dispensed) |
| Non-volatile content | 15% in aerosol |
| Repositioning time | 1-2 minutes from first contact |
| Bond and cure | Bonds within 10-20 minutes once positioned; full cure 24 hours |
| Temperature range | Up to 40°C |
| Coverage | 1m2 per 575ml aerosol can (for the 575ml size only) |
| Shelf life | Three years from date of manufacture |
| Dangerous goods | UN 1950, AEROSOLS, Class 2.1; not a marine pollutant |
| Hazard classification | Signal word Danger. H222, H229, H319 |
Choosing the right option
This is a repositionable adhesive for light bonding up to 40°C. For a permanent bond from an aerosol see CRC Ultra High Strength Spray Aerosol Adhesive 8180 - 550ml; for brush or roller applied contact adhesive see CRC ADOS F2 Multi-Purpose Contact Adhesive.
See also: CRC Ultra High Strength Spray Aerosol Adhesive 8180 - 550ml, CRC ADOS F2 Multi-Purpose Contact Adhesive, CRC ADOS F3 Non-Drip Contact Adhesive 8020 - 500ml.
| Option | Part number | SKU |
|---|---|---|
| 210 ml | 8015 | A0144324 |
| 575 ml | 8017 | A0144325 |
Using it
Directions: surfaces must be clean and dry. Shake the can, then spray from 20-25cm with a smooth sweeping action, applying a light coat only.
Non-porous surfaces: apply to one surface, allow to tack off for 1 minute (maximum 4 minutes), then press together firmly. Porous surfaces: apply to both surfaces, allow to tack off for 1 minute (maximum 4 minutes), then press together. Some porous surfaces need a sealing pre-coat.
Test in a typical bonding situation before coating the full area. After use, hold the can upside down and spray briefly to clear the nozzle. Clean surfaces with CRC Solvent PS, which is not for cleaning equipment.
It is classed as an extremely flammable aerosol (H222) with a flash point below 0°C.
Storage and handling
Store indoors at a temperature between 5°C and 20°C. Do not puncture, incinerate or store above 50°C.
Limits and safety
Classified as an extremely flammable aerosol. Signal word Danger. H222: extremely flammable aerosol. H229: pressurised container, may burst if heated. H319: causes serious eye irritation. Transport: UN 1950, aerosols, Class 2.1. Do not use it where heat-resistant or immersed-in-water bonds are required; the temperature range is up to 40°C. Read the safety data sheet before use.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
CRC ADOS Multi-Purpose Spray Adhesive: 210 ml
SKU: A0144324 | Model: 8015
CRC ADOS Multi-Purpose Spray Adhesive, 210ml aerosol. Repositionable for 1-2 minutes, full cure 24 hours. Extremely flammable.