CRC Food Grade Machine Oil 312g Aerosol

CRC Food Grade Machine Oil is a highly refined machine oil in a 312g aerosol. It is a clear, colourless, odourless, non-silicone oil that leaves a thin, oily, non-drying film.

It suits circulation systems lubricating gears and bearings on all food processing equipment. It is NSF H1 registered for incidental food contact.

Where this product is used

• Circulation systems lubricating gears on food processing equipment
• Circulation systems lubricating bearings on food processing equipment

Features

• NSF H1 registered for incidental food contact
• It meets the US FDA regulations 21 CFR 172.878, 21 CFR 178.3620 and 21 CFR 573.680 for incidental food contact
• Highly refined machine oil with a viscosity of 38-41 cSt at 40 °C
• Non-silicone, clear and colourless
• Thin, oily, non-drying film
• Continuous service temperature -20 °C to +150 °C, intermittent +170 °C
• 360 degree valve for spraying from any angle

Key specifications

Choosing the right option

This is a light machine oil for circulation systems. For a non-silicone food grade penetrating oil see CRC Non Silicone Food Grade Penetrating Oil 312g. For food grade greases see CRC White Grease Food Grade 284g and CRC Food Grade Multi-Purpose Grease 397g.

See also: CRC Non Silicone Food Grade Penetrating Oil 312g, CRC White Grease Food Grade 284g, CRC Aerosol Chain Lube Food Grade 340g, CRC Food Grade Multi-Purpose Grease 397g.

Using it

Do not apply to energised equipment.

Hold the can 20-30cm from the surface and spray a light, even film. Wipe off excess with a cloth and reapply when necessary.

Storage and handling

It has a conditional warranty of 5 years from date of manufacture. Keep the can away from heat and do not expose it to temperatures above 50 °C.

Limits and safety

Hazard classification: signal word Danger. Flammable aerosol (H223). Pressurised container: may burst if heated (H229). May be fatal if swallowed and enters airways (H304). Causes skin irritation (H315). May cause drowsiness or dizziness (H336). Toxic to aquatic life (H401). Transport class: UN 1950, Aerosols, Class 2.1. The 70 °C flash point is for the liquid component only; the can is classed as a flammable aerosol, so keep it away from heat and ignition sources. Do not apply to energised equipment. Read the safety data sheet before use.