Dixon FK6P Inferno Fire Hose Kit, 100 PSI (0.7 MPa)

This Dixon Inferno kit is built around two 10 m lengths of PVC fire hose, each fitted with brass nut and tails, and two 25 mm adjustable fire nozzles. It also includes a grey PVC suction hose with a poly strainer.

Dixon lists the kit working pressure as 100 PSI (0.7 MPa) (manufacturer-stated). The contents are: 1 x 6 m of grey PVC suction hose, fitted with a poly strainer and a brass nut and tail; 2 x 10 m of PVC fire hose, fitted with brass nut and tails; and 2 x 25 mm adjustable fire nozzles. That gives 20 m of discharge hose in total. The listing does not include a pump.

Where this product is used

• Fitting out a pump set: the kit supplies the suction hose with strainer, the discharge hose with fittings and the nozzles, and you provide the pump.

Features

• Working pressure 100 PSI (0.7 MPa) (manufacturer-stated)
• Suction hose: 1 x 6 m of grey PVC suction hose, fitted with a poly strainer and a brass nut and tail
• Discharge hose: 2 x 10 m of PVC fire hose, fitted with brass nut and tails
• Nozzles: 2 x 25 mm adjustable fire nozzles

Key specifications

Selecting the right option

Check the kit contents against your pump and water source: the listing gives the hose lengths and nozzle sizes but not the thread size of the nut and tails, so confirm the thread and the hose diameter with Dixon if you are matching them to existing fittings. Compare the working pressure with your pump's maximum output pressure before you connect the kit. The other Dixon fire hose kits are linked below and differ in hose length and nozzle size.

Related products

Related Dixon fire hose kits: Dixon Blaze Fire Hose Kit, 145 PSI (1.0 MPa) - FK420, Dixon Spotfire Fire Hose Kit, 145 PSI (1.0 MPa) - FK4 and Dixon Backburn Fire Hose Kit, 145 PSI (1.0 MPa) - FK6.