M10 x 60 mm Double Thread Screw, 316 Stainless Steel - DTSA4M10X60
The price shown is for the box.
Available
Made in 316 (A4) stainless steel, the Double Thread Screw is a headless stud with a timber thread on one end and a machine thread on the other. The timber end screws into wood, leaving the machine thread free to take a nut or to join into a threaded fitting. It is also known as a hanger bolt.
You can choose from 4 variants, covering sizes M8 to M10 and lengths 60 mm to 100 mm. Each variant is supplied in packs of 5.
The A4 (316) grade is stainless steel with added molybdenum, which helps it hold up where salt, pool chemicals or washdown chemicals are present. It is the more corrosion-resistant of the two common stainless grades, at a higher cost than 304. Metric sizes are written M followed by the nominal thread diameter in millimetres, so M10 is a 10 mm thread.
Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.
Where this product is used
- Joining timber members to threaded connectors
- Chemical and washdown areas
- Mounting fittings and hangers to timber
- Outdoor fittings exposed to salt air
- Outdoor and coastal timber fixtures
Features
- Choice of 4 sizes, M8 to M10
- Pack quantities to suit trade and bulk buying: packs of 5
- Lengths from 60 mm to 100 mm
- A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
- Timber thread on one end, machine thread on the other
- No head, so the finished joint sits flush
Key specifications
| Specification | Detail |
|---|---|
| Product | Double Thread Screw |
| Type | Headless stud with a timber thread on one end and a machine thread on the other |
| Material | A4 (316) stainless steel |
| Pack quantity | 5 |
| Thread system | Metric |
| Typical environment | Coastal, marine, pool and food-processing use |
| Key features | Timber thread on one end, machine thread on the other; No head, so the finished joint sits flush |
| Magnetic response | Generally non-magnetic (austenitic); cold-worked parts can show weak magnetism |
| Number of variants | 4 |
| Size range | M8 to M10 |
| Lengths available | 60 mm to 100 mm |
| Fitting tip | Use anti-seize on the thread to reduce galling |
Selecting the right option
Drive the timber end in with two nuts locked together on the machine thread, or with a stud driver. Pre-drill a pilot hole sized to the timber thread.
Related products
Other versions in this range: Double Thread Screw M12 — A4 (316) Stainless Steel.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Double Thread Screw - 316 Stainless Steel: M10 / 60 mm
SKU: A0087936 | Model: DTSA4M10X60
DTSA4M10X60: M10 x 60 mm double thread screw, 316 Stainless Steel. Sold in a box of 5. Suits fixing legs, feet and brackets to timber furniture.
