M8 x 45 mm Flush Head Sleeve Anchor, 316 Stainless Steel - FANA4M8X45
The price shown is for the box.
Available
The Flush Head Sleeve Anchor, 316 Stainless Steel is a sleeve anchor with a flush head that expands in drilled masonry or concrete as the bolt is tightened.
Supplied in 316 (A4) stainless steel. The molybdenum in A4 gives better resistance to chlorides than A2 (304), so it is the usual choice near the coast, around pools and in marine and food-processing environments. Metric sizes are written M followed by the nominal thread diameter in millimetres, so M10 is a 10 mm thread.
You can choose from 9 variants, covering sizes M8 to M12 and lengths 45 mm to 100 mm. Pack quantities depend on size: packs of 25 to 100.
Austenitic stainless steel is generally non-magnetic, although cold-worked parts can show weak magnetism. Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.
Where this product is used
- Chemical and washdown areas
- Larger sizes for frames, plant and structural fixings
- Concrete, brick and block fixings
- Coastal and wet-area masonry fixings
- Swimming pool and spa equipment
- Fixing timber, brackets and plates to masonry
Features
- Supplied in packs of 25 to 100
- Metric thread sizes match the nuts, bolts and tapped holes in most Australian-supplied equipment
- Range covers M8 to M12 in 9 variants
- Sleeve expands as the bolt is tightened
- Flush head sits level with the surface
- A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
Key specifications
| Specification | Detail |
|---|---|
| Product | Flush Head Sleeve Anchor |
| Type | Sleeve anchor with a flush head that expands in drilled masonry or concrete as the bolt is tightened |
| Material | A4 (316) stainless steel |
| Listed variants | 9 |
| Sizes available | M8 to M12 |
| Environment | Coastal, marine, pool and food-processing use |
| Lengths | 45 mm to 100 mm |
| Magnetic response | Generally non-magnetic (austenitic); cold-worked parts can show weak magnetism |
| Thread system | Metric |
| Key features | Flush head sits level with the surface; Sleeve expands as the bolt is tightened |
| Supplied in packs of | 25 to 100, by size |
| Fitting tip | Use anti-seize on the thread to reduce galling |
Selecting the right option
Drill to the hole diameter and depth specified for the anchor size and clear the dust. Check the anchor load data for your base material before use.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Flush Head Sleeve Anchor - 316 Stainless Steel: M8 / 45 mm
SKU: A0073088 | Model: FANA4M8X45
FANA4M8X45: M8 x 45 mm flush head sleeve anchor, 316 Stainless Steel. Sold in a box of 100. Suits fixing timber, brackets and plates to masonry.

