Frontier Nitrile Full Dipped Gloves, Blue, Size 10, Pack of 12

Frontier full dipped nitrile glove has a medium weight nitrile coat over the whole glove and a knitted wrist to exclude debris.

The 3111X result is abrasion 3, blade cut 1, tear 1, puncture 1, and the X means the cut test to ISO 13997 was not done. Used for assembly, chemical handling, mining, waste management, foundry and general purpose work. The EN 388 result is read in the order abrasion, blade cut, tear and puncture, and a higher number is a higher level. A 0 means the glove did not reach level 1, and an X means that test was not done. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

Where this product is used

• Assembly and general purpose work
• Chemical handling, subject to your own chemical check
• Mining, waste management and foundry work

Features

• Medium weight full nitrile coat
• Resistant to oils and greases
• Knitted wrist to exclude debris
• Sanitised with Actifresh
• EN 388 3111X

Key specifications

Choosing the right option

Choose the full dipped nitrile glove when the whole hand needs a liquid barrier. For a nitrile coat on the palm see the Nitrile Sand glove and Takt micro foam nitrile glove.

Related Frontier products: Nitrile Sand glove, Nitrile Sand glove, XL, pack of 12, Takt micro foam nitrile glove, lattice glove.