Garrick Herbert grade 80 2-leg chain sling

Garrick Grade 80 chain slings are two-leg slings with latch type hooks, made from Grade 80 chain and fitted with two shorteners that use G80 shortening grab hooks. They are available in 8mm, 10mm and 13mm chain, in lengths of 2, 3, 4 and 6 m.

AS 3775.1 as the approved standard.

Where this product is used

• Slinging and lifting loads from a crane or hoist where a Grade 80 chain sling is specified
• Adjusting the effective leg length with the shorteners and grab hooks

Features

• Grade 80 chain with latch type hooks
• Two shorteners in Grade 80 chain with G80 shortening grab hooks
• Chain sizes 8mm, 10mm and 13mm
• Lengths of 2, 3, 4 and 6 m

Key specifications

Choosing the right option

Select by chain size first, as the WLL is set by the chain size, then by length. Use the WLL for the angle between the legs that matches your lift, and never exceed the rating marked on the sling. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards.

For other sling types see the: Garrick flat webbing slings, Garrick round slings.