HiKOKI KC36D8P3(HRZ) 36V Brushless Combo Kit, 8 Pieces | AIMS

• DV36DC impact driver drill with Reactive Force Control (RFC), LED warning signals, heat-resistant design and an 11-position side handle
• WH36DC high-torque impact driver with 5 modes, IP56 dust and water resistance, triple hammer and 3 LED lights
• G3613DVF grinder with high-power 1500W motor, detachable filter, paddle switch, toolless wheel guard and LED status indicator
• C3607DB circular saw with a no-load speed of 6,000 min-1, robust aluminium die-cast base, rafter hook, soft start and dust blower
• DH3628DA SDS Plus rotary hammer delivering 3.2J impact energy with UVP vibration reduction, RFC and an ergonomic L-shaped body
• CR36DA reciprocating saw with 4-step speed selection, orbital and swing cutting mechanism, twin rotation counterweight system and large pivot hook
• UB18DA search light with wide mode and continuous runtime up to 22 hours in Wide (Eco) mode, plus IP54 water and dust resistance
• UR18DA digital radio with Bluetooth for jobsite audio
• MultiVolt batteries offer dual voltage (18V and 36V) with Multiplex Protection Circuit and no memory effect
• UC18YSL3 rapid charger with cooling and USB port, charging a 5.0Ah battery in approximately 32 minutes

This eight-piece 36V brushless combo kit spans driving, grinding, sawing, SDS Plus hammer drilling, lighting and jobsite audio with two MultiVolt batteries and a rapid charger.

Construction and Building

• Drilling anchor holes into concrete with the 3.2J SDS Plus rotary hammer
• Cutting framing timber with the 185 mm circular saw at 6,000 min-1
• Driving structural fasteners with the high-torque impact driver
• Lighting up work areas with the IP54 search light

Carpentry and Joinery

• Ripping and cross-cutting timber with the circular saw
• Driving screws and bolts in framing and fit-out work
• Pre-drilling and countersinking with the impact driver drill
• Rough cutting and demolition with the reciprocating saw

Metal Fabrication and Welding

• Grinding welds and dressing steel with the 1500W grinder
• Cutting steel sections with abrasive discs
• Drilling and fastening steel framing and brackets

Maintenance and Facilities

• Light demolition and chasing with the rotary hammer
• General fastening and assembly across plant and buildings
• Jobsite audio from the Bluetooth digital radio through long shifts