Loctite SF 7063 General Purpose Cleaner 400ml Aerosol

Loctite SF 7063 is a clear, colourless, non-CFC solvent cleaner. Henkel describes it as an isoparaffin, dimethoxymethane and ethanol blend for cleaning and degreasing surfaces that will be bonded with Loctite adhesives, and for cleaning machine components during maintenance.

You spray it on or wipe it on with a solvent-soaked paper towel, then let it evaporate fully before bonding. It has no effect on the speed of cure or final strength of Loctite adhesives. This listing is the 400ml aerosol.

Where this product is used

• Cleaning and degreasing surfaces before bonding with Loctite adhesives
• Cleaning and degreasing machine components during maintenance
• Preparing parts for Loctite adhesives without affecting cure speed or final strength
• Removing heavy contamination by wiping with a clean cloth while the solvent is still wet

Features

• Clear, colourless solvent solution
• Non-CFC solvent blend
• Very low viscosity: 2 mPa·s at 20 °C
• Typical drying time of 60 seconds or less at 20 °C
• No effect on the speed of cure or final strength of Loctite adhesives
• Spray or wipe application

Key specifications

Selecting the right option

Loctite SF 7063 is a solvent cleaner for surface preparation before bonding. For a water-based concentrate for general degreasing, see Loctite SF 7840 Biodegradable Cleaner Degreaser. For a wipe format, see Loctite SF 7617 Industrial Hand Wipes - 75 Wipe Canister.

Using it

Spray the surface, or wipe it with a solvent-soaked paper towel. Wipe with a clean cloth while the surface is still wet to remove heavy contamination.

Let the solvent evaporate fully before bonding, to avoid solvent being trapped in the joint.

Henkel gives the exposure limit as TLV (ACGIH) 600 ppm. The flash point and handling details are in the safety data sheet.

Storage and handling

Flammable. Store unopened in a dry place, away from oxidisers and combustibles. The optimal storage temperature is 8 °C to 21 °C. Storage below 8 °C or above 28 °C can affect the properties of the product.

Limits and safety

Handle as highly flammable and keep it away from naked flames and non-flameproofed electrical equipment. The solvent can affect certain plastics or coatings, so check compatibility first. Not recommended for pure oxygen or oxygen-rich systems, or for use with chlorine or strong oxidisers. Read the safety data sheet before use.

Frequently asked questions

How fast does Loctite SF 7063 dry?

Typical drying time is 60 seconds or less at 20 °C. Let it evaporate fully before bonding.

Will Loctite SF 7063 affect adhesive cure?

No. Henkel states it has no effect on the speed of cure or final strength of Loctite adhesives.

How do I use Loctite SF 7063?

Spray the surface or wipe it with a solvent-soaked paper towel. Then wipe with a clean cloth while it is still wet to remove heavy contamination.

Can Loctite SF 7063 damage plastics?

The solvent can affect certain plastics or coatings, so check compatibility before use.

Is Loctite SF 7063 flammable?

Yes. Handle it as a highly flammable material and keep it away from naked flames and non-flameproofed electrical equipment.

Related products

See also: Loctite SF 7840 Biodegradable Cleaner Degreaser, Loctite SF 7617 Industrial Hand Wipes - 75 Wipe Canister, Loctite 230824 Brake And Parts Cleaner Aerosol Spray - 417g.