***Drill bit not included. Image is for illustration purposes only.***

Metabo 2 Speed Impact Drill With Restart & Overload Protection

• Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
• Thumbwheel for Speed Preselection
• Selectable ""impuls"" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
• Robust die cast aluminium gear housing for optimum heat dissipation and long service life
• Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
• Metabo Marathon-motor with dust protection for long service life
• Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
• Forward and reverse rotation
• Keyless chuck and spindle stop gear for convenient one-handed tool change
• Spindle with hexagonal recess for screwdriver bits for working without chuck
• Overload protection: protects the motor from overheating
• Restart protection: prevents unintentional start-up after power supply interruption
• Cable-protecting ball joint for optimal freedom of motion when working
• Wear Indication for Carbon Brush
• With metaBOX, the intelligent solution for transport and storage

Contents

• Futuro Plus keyless chuck
• Rubber-coated side handle
• Drilling depth guide
• metaBOX 145 L

Characteristics

Drill-Ø masonry
24 mm / 15/16 "
Drill-Ø concrete
22 mm / 7/8 "
Drill Ø steel
16 / 10 mm // 5/8 / 3/8 "
Drill-Ø soft wood
40 / 25 mm // 1 9/16 / 1 "
No-load speed
0 - 1100 / 0 - 3100 rpm
Revolutions at rated load
1100 / 3100 rpm
Maximum impact rate
58900 bpm
Gears
2
Collar diameter
43 mm / 1 11/16 "
Drill spindle with hexagonal recess
6.35 mm / 1/4 "
Drill spindle thread
1/2 " - 20 UNF
Chuck clamping type
Keyless chuck
Weight (without power cable)
2.8 kg / 6.2 lbs
Cable length
4 m / 13 ft

Vibration

Drilling in metal
4.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Impact drilling concrete
17 m/s²
Uncertainty of measurement K
1.5 m/s²

Noise Emission

Drilling in metal
4.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Impact drilling concrete
17 m/s²
Uncertainty of measurement K
1.5 m/s²