Bremick BH46GLM060025 M6 x 25mm Hex Coach Screw, Grade 4.6, Galvanised

The Bremick hex coach screw is Grade 4.6, mild steel, galvanised finish, with a hexagon head and a threaded shank that is turned into timber with a spanner or socket. This page lists 39 items: M6 to M20 diameter, 25mm to 200mm long.

Pack quantities range from 25 to 150.

Bremick Fasteners Ltd describes itself as an Australian owned and operated fastener organisation (manufacturer-stated).

Where this product is used

• Driven into timber with a spanner or socket
• Fixing timber framing and fittings where a hex head is wanted
• Securing brackets, plates and frames to timber

Features

• 39 items: M6 to M20 diameter, 25mm to 200mm long
• Metric thread; pitch not listed
• Grade 4.6, mild steel, galvanised finish
• Pack quantity shown for each item
• Hex head

Common specifications

Key specifications

Pack quantity is as listed for each item.

Selecting the right option

Choose the diameter and length together: metric sizes are the nominal diameter in millimetres, and the length is normally measured from under the head to the tip. The thread pitch is not listed for these items. Pack quantity differs by size and is shown in the table. The listing names the screw only, so order washers separately if you need them. Choose galvanised or zinc finish for the environment; no corrosion life is listed for either, so none is published here.

Related products

Related products: zinc hex coach screw, Grade 4.6, metric flat round washer, hot dip galvanised and purlin bolt and nut assembly, Grade 4.6.