Hobson MNPZM0650025 6.5 x 25mm Nail-In Anchor

This is the Hobson nail-in anchor (mushroom head and zinc alloy body). It lists 4 items: 6.5mm in 25 to 50mm lengths.

A nail-in anchor has a body that is fitted into a pre-drilled hole and a pin that is driven in to expand the body.

Every item is supplied as a box of 100.

The product title says zinc plated; the published product details say zinc alloy body, which is what this listing publishes.

Where this product is used

• Lightweight fixing to masonry
• Fixing timber battens, trim and light frames to brick and block
• Light fittings and fixtures that are not carrying heavy loads
• There are 4 items with 6.5mm diameter only and lengths from 25mm to 50mm, so work out the size you need first and then read across the table.

Material

The body is listed as zinc alloy (published product details). No load rating is given, so keep it for light fixings in masonry and check the manufacturer's data.

Installation

Drill the hole, fit the anchor through the fixture and drive the pin home with a hammer. No hole size or load rating is listed, so treat it as a light-duty fixing.

Features

• 4 items: 6.5mm in 25 to 50mm lengths
• Mushroom head and zinc alloy body
• Supplied as a box of 100
• Material: zinc alloy

Common specifications

Key specifications

Selecting the right option

Choose the size and length together to suit the fixture and the base material. This listing gives no load ratings, base material suitability or hole sizes. Check the manufacturer's installation data for the item before you specify it.

Related products

Related anchors: Hobson Round Head Nail-In Anchor, Nylon Body, 304 SS Pin, 5 and 6.5mm, Hobson Mushroom Head Nail-In Anchor, Zinc Alloy Body, Steel Pin, 5 x 22mm, Box of 100 and Hobson Conxtruct Round Head Nail-In Anchor, Nylon Body, Steel Pin, 5 and 6.5mm.