Finer Power NBR 70 O-Ring, inside diameter - id (mm) 46
Available
NBR (nitrile rubber) 70 durometer metric O-rings with a 5mm cross section.
An O-ring seals a joint by sitting in a groove and being squeezed between two surfaces, and nitrile rubber is a common choice for oils, fuels and hydraulic fluids. The part number reads MOR, the inside diameter, X and the cross section, so MOR76X5 is 76mm inside diameter by 5mm cross section. Measured dimensions and tolerances come in each part number.
Where this product is used
- Sealing flanges, covers and housings in machinery
- Sealing hydraulic and pneumatic fittings, cylinders and valves
- Sealing pump, gearbox and filter housings
- Replacing worn or damaged O-rings during maintenance
Features
- Nitrile rubber (NBR), 70 durometer
- 45 sizes, 30 to 150mm inside diameter
- Cross section 5mm
- Measured dimensions and tolerances for every part number
Key specifications
| Specification | Detail |
|---|---|
| Material | Nitrile rubber (NBR) |
| Hardness | 70 durometer |
| Series | Metric (MOR) |
| Cross section | 5mm |
| Inside diameter | 30 to 150mm |
| Sizes | 45 part numbers |
Sizes available
| Part number | ID (mm) | Cross section (mm) | ID (in) | Pack |
|---|---|---|---|---|
| MOR30X5 | 30 ± 0.29 | 5 ± 0.13 | 1.181 ± 0.011 | - |
| MOR32X5 | 32 ± 0.32 | 5 ± 0.13 | 1.26 ± 0.013 | - |
| MOR34X5 | 34 ± 0.33 | 5 ± 0.13 | 1.339 ± 0.013 | - |
| MOR36X5 | 36 ± 0.35 | 5 ± 0.13 | 1.417 ± 0.014 | - |
| MOR38X5 | 38 ± 0.36 | 5 ± 0.13 | 1.496 ± 0.014 | - |
| MOR40X5 | 40 ± 0.38 | 5 ± 0.13 | 1.575 ± 0.015 | - |
| MOR42X5 | 42 ± 0.4 | 5 ± 0.13 | 1.654 ± 0.016 | - |
| MOR44X5 | 44 ± 0.41 | 5 ± 0.13 | 1.732 ± 0.016 | - |
| MOR46X5 | 46 ± 0.43 | 5 ± 0.13 | 1.811 ± 0.017 | - |
| MOR48X5 | 48 ± 0.44 | 5 ± 0.13 | 1.89 ± 0.017 | - |
| MOR50X5 | 50 ± 0.46 | 5 ± 0.13 | 1.969 ± 0.018 | - |
| MOR52X5 | 52 ± 0.47 | 5 ± 0.13 | 2.047 ± 0.019 | - |
| MOR54X5 | 54 ± 0.5 | 5 ± 0.13 | 2.126 ± 0.02 | - |
| MOR58X5 | 58 ± 0.52 | 5 ± 0.13 | 2.284 ± 0.021 | - |
| MOR60X5 | 60 ± 0.54 | 5 ± 0.13 | 2.362 ± 0.021 | - |
| MOR62X5 | 62 ± 0.55 | 5 ± 0.13 | 2.441 ± 0.022 | - |
| MOR64X5 | 64 ± 0.58 | 5 ± 0.13 | 2.52 ± 0.023 | - |
| MOR66X5 | 66 ± 0.59 | 5 ± 0.13 | 2.598 ± 0.023 | - |
| MOR68X5 | 68 ± 0.61 | 5 ± 0.13 | 2.677 ± 0.024 | - |
| MOR70X5 | 70 ± 0.62 | 5 ± 0.13 | 2.756 ± 0.024 | - |
| MOR72X5 | 72 ± 0.63 | 5 ± 0.13 | 2.835 ± 0.025 | - |
| MOR74X5 | 74 ± 0.65 | 5 ± 0.13 | 2.913 ± 0.026 | - |
| MOR76X5 | 76 ± 0.66 | 5 ± 0.13 | 2.992 ± 0.026 | - |
| MOR78X5 | 78 ± 0.67 | 5 ± 0.13 | 3.071 ± 0.026 | - |
| MOR80X5 | 80 ± 0.69 | 5 ± 0.13 | 3.15 ± 0.027 | - |
| MOR82X5 | 82 ± 0.7 | 5 ± 0.13 | 3.228 ± 0.028 | - |
| MOR84X5 | 84 ± 0.72 | 5 ± 0.13 | 3.307 ± 0.028 | - |
| MOR86X5 | 86 ± 0.73 | 5 ± 0.13 | 3.386 ± 0.029 | - |
| MOR88X5 | 88 ± 0.74 | 5 ± 0.13 | 3.465 ± 0.029 | - |
| MOR90X5 | 90 ± 0.76 | 5 ± 0.13 | 3.543 ± 0.03 | - |
| MOR92X5 | 92 ± 0.77 | 5 ± 0.13 | 3.622 ± 0.03 | - |
| MOR94X5 | 94 ± 0.78 | 5 ± 0.13 | 3.701 ± 0.031 | - |
| MOR96X5 | 96 ± 0.8 | 5 ± 0.13 | 3.78 ± 0.032 | - |
| MOR98X5 | 98 ± 0.81 | 5 ± 0.13 | 3.858 ± 0.032 | - |
| MOR100X5 | 100 ± 0.82 | 5 ± 0.13 | 3.937 ± 0.032 | - |
| MOR105X5 | 105 ± 0.86 | 5 ± 0.13 | 4.134 ± 0.034 | - |
| MOR110X5 | 110 ± 0.89 | 5 ± 0.13 | 4.331 ± 0.035 | - |
| MOR115X5 | 115 ± 0.93 | 5 ± 0.13 | 4.528 ± 0.037 | - |
| MOR120X5 | 120 ± 0.96 | 5 ± 0.13 | 4.724 ± 0.038 | - |
| MOR125X5 | 125 ± 0.99 | 5 ± 0.13 | 4.921 ± 0.039 | - |
| MOR130X5 | 130 ± 1.03 | 5 ± 0.13 | 5.118 ± 0.041 | - |
| MOR135X5 | 135 ± 1.06 | 5 ± 0.13 | 5.315 ± 0.042 | - |
| MOR140X5 | 140 ± 1.09 | 5 ± 0.13 | 5.512 ± 0.043 | - |
| MOR145X5 | 145 ± 1.13 | 5 ± 0.13 | 5.709 ± 0.045 | - |
| MOR150X5 | 150 ± 1.16 | 5 ± 0.13 | 5.906 ± 0.046 | - |
Choosing the right option
Choose the O-ring from the groove it fits: the inside diameter, the cross section and the part number. To match an existing O-ring, measure the cross section with calipers and the inside diameter with the O-ring relaxed, then pick the closest part number.
Other metric cross sections are under NBR 70 O-Ring, Metric, 4mm Cross Section, 4 to 150mm ID; NBR 70 O-Ring, Metric, 6mm Cross Section, 50 to 150mm ID; NBR 70 O-Ring, Metric, 3.5mm Cross Section, 5 to 150mm ID; NBR 70 O-Ring, Metric, 3mm Cross Section, 3 to 150mm ID. For a size that is not stocked, NBR 70 O-Ring Cord, Metric, 1.5 to 16mm Diameter can be cut and joined to make a seal for a non-standard groove.
Nitrile rubber suits many oils, fuels and hydraulic fluids. Check that the fluid and the operating conditions suit nitrile before fitting.
| Option | Part number | SKU |
|---|---|---|
| 30 | MOR30X5 | A0126102 |
| 32 | MOR32X5 | A0126109 |
| 34 | MOR34X5 | A0126117 |
| 36 | MOR36X5 | A0126125 |
| 38 | MOR38X5 | A0126133 |
| 40 | MOR40X5 | A0126142 |
| 42 | MOR42X5 | A0126149 |
| 44 | MOR44X5 | A0126157 |
| 46 | MOR46X5 | A0126165 |
| 48 | MOR48X5 | A0126173 |
| 50 | MOR50X5 | A0126182 |
| 52 | MOR52X5 | A0126189 |
| 54 | MOR54X5 | A0126196 |
| 58 | MOR58X5 | A0126208 |
| 60 | MOR60X5 | A0126215 |
| 62 | MOR62X5 | A0126220 |
| 64 | MOR64X5 | A0126224 |
| 66 | MOR66X5 | A0126229 |
| 68 | MOR68X5 | A0126233 |
| 70 | MOR70X5 | A0126237 |
| 72 | MOR72X5 | A0126242 |
| 74 | MOR74X5 | A0126246 |
| 76 | MOR76X5 | A0126256 |
| 78 | MOR78X5 | A0126260 |
| 80 | MOR80X5 | A0126264 |
| 82 | MOR82X5 | A0126269 |
| 84 | MOR84X5 | A0126273 |
| 86 | MOR86X5 | A0126278 |
| 88 | MOR88X5 | A0126281 |
| 90 | MOR90X5 | A0126285 |
| 92 | MOR92X5 | A0126290 |
| 94 | MOR94X5 | A0126293 |
| 96 | MOR96X5 | A0126298 |
| 98 | MOR98X5 | A0126302 |
| 100 | MOR100X5 | A0126251 |
| 105 | MOR105X5 | A0126033 |
| 110 | MOR110X5 | A0126037 |
| 115 | MOR115X5 | A0126041 |
| 120 | MOR120X5 | A0126045 |
| 125 | MOR125X5 | A0126049 |
| 130 | MOR130X5 | A0126052 |
| 135 | MOR135X5 | A0126056 |
| 140 | MOR140X5 | A0126059 |
| 145 | MOR145X5 | A0126063 |
| 150 | MOR150X5 | A0126067 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
NBR 70 O-Ring, Metric, 5 mm Cross Section, 30 to 150 mm ID: 46
SKU: A0126165 | Model: MOR46X5
NBR 70 O-ring MOR46X5, 46mm inside diameter x 5mm cross section. Nitrile rubber, 70 durometer.
