Ninja Multi-Tech Nitrachem65 Gauntlet, Orange, Large (NINITRACMOO000L)

The Ninja Multi-Tech Nitrachem65 is a chemical resistant gauntlet with a full nitrile coating over a soft cotton interlock liner. Ninja's data sheet lists a crumb finish for grip in damp or greasy conditions, an eyelet for hanging, and a length of 65 cm (manufacturer-stated). The length is about 60 to 65 cm.

Ninja gives EN ISO 374-1:2016 Type A with the letters J, K, L, M, P and T, and EN ISO 374-5:2016 for virus (manufacturer-stated). Those letters are n-heptane, 40% sodium hydroxide, 96% sulphuric acid, 65% nitric acid, 35% hydrogen peroxide and 37% formaldehyde, each at performance level 2, which is at least 30 minutes to breakthrough (manufacturer-stated). Ninja also gives EN 388:2016 4111X (manufacturer-stated). A chemical rating applies to the chemicals listed and the test conditions, so check your chemical, its concentration and the exposure time with your safety adviser before you rely on the glove.

Ninja lists applications as chemical processing, janitorial work, petrochemicals and degreasing operations (manufacturer-stated). The EN 388:2016 result (manufacturer-stated) is read in the order abrasion, blade cut, tear, puncture and then a cut letter from A to F. A higher number or letter is a higher level, a 0 means level 1 was not reached, and an X means that test was not done. A P at the end means the impact test was passed. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

This listing is the orange large (NINITRACMOO000L). Ninja's data sheet lists small to 2X-large, and Beaver's catalogue lists medium, large and X-large. Beaver packs the glove 3 pairs to a pack and 36 pairs to a carton (manufacturer-stated).

Where this product is used

• Chemical processing (manufacturer-stated)
• Janitorial work and degreasing (manufacturer-stated)
• Petrochemical work (manufacturer-stated)

Features

• Full nitrile coat with crumb finish (manufacturer-stated)
• Soft cotton interlock liner (manufacturer-stated)
• Gauntlet length of about 60 to 65 cm (manufacturer-stated)
• Eyelet for hanging (manufacturer-stated)
• EN ISO 374-1:2016 Type A JKLMPT (manufacturer-stated)
• EN ISO 374-5:2016 virus (manufacturer-stated)

Key specifications

Selecting the right option

Choose the Nitrachem65 for chemical handling where the listed chemicals match your job. For a cut resistant chemical gauntlet see the Premier Cut D gauntlet.

Related products

Other Ninja chemical resistant gloves: Premier Cut D gauntlet. For general purpose gloves see the Maxim GripX glove, Multi Flex glove and Multi Lite glove.