Ninja Cut F impact gloves, Medium

The Ninja RAZR Slash-Tec FA6-Impact is the FA6 cut resistant glove with impact protection on the back of the hand and fingers. It has an 18 gauge liner of Kevlar, modacrylic and steel, and a black NFT (New Foam Technology) coat on the palm with thumb line dipping. It has reinforcement over the full thumb and forefinger, a colour coded size band, and a coat that gives oil, dry and wet grip and lets air through. The liner is black and red and the glove is 25cm long (size large).

It has EN 388:2016 4X42FP, which is abrasion 4, blade cut not tested, tear 4 and puncture 2, with a cut result of F and the impact test passed. Ninja also gives EN 407:2004 X1XXXX. The EN 407 result is read in the order burning behaviour, contact heat, convective heat, radiant heat, small molten metal splash and large molten metal splash. An X means that test was not done, so the glove has no rating for it. Contact heat level 1 is the lowest level, so this is not a heat resistant glove.

Where this product is used

• Construction and mining
• Oil and gas, machinery and equipment
• Fabrication and sheet metal work
• Scaffolding, timber and forestry

Features

• Cut result F with impact test passed (EN 388:2016 4X42FP)
• Impact protection on the back of the hand and fingers
• 18 gauge Kevlar, modacrylic and steel liner
• Reinforced thumb and forefinger
• NFT palm coat for oily, dry and wet grip

Key specifications

Choosing the right option

Choose the FA6-Impact where knocks to the back of the hand are likely as well as cuts. Without impact protection see the Slash-Tec FA6 glove.

Other Ninja cut resistant gloves: Slash-Tec FA6 glove, Slash-Tec DA4 glove, medium, RAZR NFT CA3 glove.