Pacific PPHT050 Porta Hoist Single Phase Electric Trolley, 500kg, 75 to 125mm Beam

The Pacific Porta Hoist Trolley (PPHT050) is a single speed electric trolley listed in the Pacific Hoists catalogue straight after the Pacific Porta Hoist. It is rated for 500kg, runs on 240V single phase at 14 m/min and fits a beam width range of 75 to 125mm (manufacturer-stated).

The Pacific Porta Hoist options in the catalogue include an electric trolley. The catalogue gives the rated capacity, beam width range, voltage and speed for this trolley and nothing more: it lists no weight, no wheel or flange details and no description, so none is published here.

Check the trolley against your beam width and the hoist you plan to hang from it before ordering. No certificate or test report is shown on this page: if your site needs proof of compliance, ask for the maker's documents before you buy.

Where this product is used

• Moving a Porta Hoist and its load along a beam under power
• Repeat lifts and moves along a runway in workshops and maintenance areas
• Positioning loads at set points along a beam

Features

• 500kg rated capacity (manufacturer-stated)
• Beam width range 75 to 125mm (manufacturer-stated)
• 240V single phase, single speed at 14 m/min (manufacturer-stated)

Key specifications

Selecting the right option

Check the beam width against the 75 to 125mm range and keep the combined hoist and load inside the 500kg rated capacity. The catalogue gives no trolley weight, so allow for it in the beam loading. Lifting equipment must be used within its rated capacity, inspected before each use, and selected and used in line with your site lifting procedure and the applicable standards and regulations. Do not use it to lift or lower people. If you are unsure what suits your lift, speak to a qualified rigger before ordering.

Related products

See also Pacific Porta Hoist electric chain hoists.