Pferd oval burr, 1/4 x 3/8"

It has 3 Pferd oval burrs: shank-mounted tungsten carbide burrs with cut 3 PLUS, all on a 6.35mm shank. Head sizes (diameter x cut length) run from 1/4 x 3/8 to 1/2 x 7/8".

The this TRE family is an oval burr for general use on all materials, with a good stock removal rate from the matching of tungsten carbide, geometry, cut and coating. The cut 3 PLUS is similar to cut 3 but with a cross cut, for machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys.

Where this product is used

• Machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys
• High stock removal with good surfaces
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material

Features

• Head sizes (diameter x cut length): 1/4 x 3/8 to 1/2 x 7/8"
• 6.35mm shank
• Cut 3 PLUS: cross cut, similar to cut 3
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity
• Long tool life

Key specifications

Choosing the right option

Match the shank to your tool: this item has a 6.35mm shank. Choose the head size for the feature you are cutting. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks.

Related burrs: Pferd Extended Oval Shape Burr TRE 6,35x9,5x6,35-150 Z3P, 6.35mm Shank, 161.92mm Overall (21725982), Pferd Oval Shape Burr TRE, Cut 3 PLUS, 6 x 10 to 12 x 20mm, 6mm Shank, Pferd Oval Shape Burr TRE 0307/3 Z3 PLUS, 3 x 7mm, 3mm Shank (21210083).