Pferd 21100586 ZYAS Cylindrical End Cut Burr 12 x 25 mm, ALU Cut, 6 mm Shank

The Pferd ZYAS Cylindrical End Cut Burr is a tungsten carbide burr in ALU cut with a 6 mm shank (manufacturer-stated). This page lists 2 items, with head sizes of 10 x 20 and 12 x 25 mm (diameter x cut length) and total lengths of 60 to 65 mm.

The catalogue describes the ZYAS as a cylindrical burr according to DIN 8032 with circumferential and end cut for an extremely high stock removal rate, long tool life and smooth operation when machining aluminium (manufacturer-stated).

The ALU cut gives a high stock removal rate on aluminium and aluminium alloys, non-ferrous metals and plastics, with smooth milling (manufacturer-stated).

Special features listed in the catalogue: large chips and reduced material adhesion (manufacturer-stated).

Where this product is used

• Machining aluminium and aluminium alloys (manufacturer-stated)
• Machining non-ferrous metals and plastics (manufacturer-stated)

Features

• ALU Cut: high stock removal rate on aluminium and aluminium alloys, with smooth milling (manufacturer-stated)
• Circumferential cut plus end cut, 6 mm shank (manufacturer-stated)
• Head sizes 10 x 20 and 12 x 25 mm; total length 60 to 65 mm (manufacturer-stated)
• Large chips and reduced material adhesion (manufacturer-stated)

Common specifications

Key specifications

Each item number is a separate head size; all share the 6 mm shank and ALU cut.

Selecting the right option

Pick the head size for the job: d1 is the burr diameter and l2 the cut length, and the table shows the total length l1 of each item. Check that your tool holds a 6 mm shank. For steel, cast steel and cast iron the catalogue lists the ALLROUND cut (manufacturer-stated). Do not exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and do not use a damaged burr (manufacturer-stated).

Related products

Same cut in other shapes: Pferd WRC Cylindrical Radius End Burr, ALU Cut, 6 mm Shank, 12 x 25 mm (21105386) and Pferd WRC Cylindrical Radius End Burr, ALU Cut, 6 mm Shank, 6 x 16 mm. Same shape in other cuts: Pferd ZYAS Cylindrical End Cut Burr, Cut 3 PLUS, 6 mm Shank, 6 x 16 to 16 x 25 mm and Pferd ZYAS Cylindrical End Cut Burr, TOUGH Cut, 6 mm Shank, 8 x 20 and 10 x 20 mm.