Pferd Policap Cap Abrasive Aluminium Oxide G Shape

• POLICAP Abrasive Cap Aluminium Oxide - G Shape 
• Abrasive: Aluminium oxide A
• POLICAP tools have a seamless design and the entire tool surface can be used.
• Matching, reusable holders are available for using abrasive caps and cones.
• The high degree of fitting accuracy between the components ensures that the abrasive caps and cones remain securely attached to the holder during use.

Advantages

• Because of slots, the holder expands during use, guaranteeing that the abrasive cap/ cone is firmly clamped in place
• Good dimensional stability and excellent fine grinding thanks to a special manufacturing process
• Easy tool change  

Application examples

• Fine grinding in tool and mould construction
• Finishing on turbine blades after repair
• Feather edging of radii at transitions after milling frames in aircraft construction
• Fine grinding of hard-to-reach areas and bores
• Levelling of transitions in fitting and pump construction

• Leveling
• Surface work
• Fine grinding in multiple steps

Drive types:

• Flexible shaft drive
• Straight grinder

Classification

profi class 5.0
EAB829c027
eclass 8.1
21019207
eclass 7.0
21011318
eclass 4.1
21011303

• Abrasive caps and cones can be mounted and removed by turning them slightly to the right
• Abrasive caps and cones are easier to replace when the holder is mounted on the tool drive
• Abrasive caps and cones achieve their best performance at a recommended cutting speed of 20 m/s

Safety notes

• The maximum permitted peripheral speed is 25 m/s
• For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times

Materials that can be worked:

• Stainless steel (INOX)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Steel materials with a hardness over 54 HRC
• Steel, cast steel
• Steels up to 1,200 N/mmÅ’_ (< 38 HRC)
• Cast steel