Saber 1/2" (12.7mm) TiN Coated Jobber Drill 8011-1/2S
Available
Saber 8011 TiN coated jobber drill bits are M2-HSS twist drills for tradespeople, fabricators, maintenance fitters, panel beaters and apprentices who drill steel. Pick your size from 29 fractional sizes between 1/16" (1.59mm) and 1/2" (12.7mm). Each size is its own hang-sell clam shell with one drill inside, apart from the five smallest sizes, which come as a 2 pack.
A jobber drill is the standard length twist drill used in most workshops. M2-HSS is a high speed steel grade. The gold finish is TiN (titanium nitride), a hard coating put on by Physical Vapour Deposition. It dissipates heat, reduces friction and cold welding, allows higher speed and feed rates and greatly increases tool life. The 135° split point centres itself and gets into the cut quickly. This point suits harder steel, especially deep holes. Choose the Saber 8003 bright drills for general work and non-ferrous metals. Note that the coating wears off when resharpened, so performance drops after regrinding.
Where this product is used
- Drilling harder steel, including deep holes
- Drilling at higher speeds and feeds than an uncoated drill
- Buying a single fractional size, one drill per clam shell (2 pack in the five smallest sizes)
Features
- M2-HSS jobber drill with a gold finish TiN (titanium nitride) coating
- TiN coating helps dissipate heat and reduces friction and cold welding
- Higher speed and feed rates can be achieved and tool life is greatly increased
- 135° split point (crankshaft point) is self centering and gets into the cut faster, reducing end thrust
- 135° point suits harder steel, especially deep hole applications
- 29 sizes from 1/16" (1.59mm) to 1/2" (12.7mm)
- Flute length runs from 22mm to 114mm and overall length from 48mm to 152mm across the range
- Made to ANSI B94-11
- Performance deteriorates after resharpening, as with all surface coated tools
- One drill per hang-sell clam shell, with a 2 pack for 1/16", 5/64", 3/32", 7/64" and 1/8"
Key specifications
| Specification | Detail |
|---|---|
| Brand | Saber |
| Model | Saber 8011 TiN coated M2-HSS jobber drill |
| Part numbers | 8011-1/16S to 8011-1/2S, one per size (see the options table) |
| Range | HSS TiN Coated Fractional Clam Shell (hang sell) |
| Type | Jobber twist drill, fractional (inch) sizes |
| Sizes | 29 sizes from 1/16" (1.59mm) to 1/2" (12.7mm) |
| Material | M2-HSS |
| Coating | Gold finish TiN (titanium nitride), applied by Physical Vapour Deposition |
| Point | 135° split point (crankshaft point) |
| Standard | ANSI B94-11 |
| Flute length | 22mm (1/16") to 114mm (1/2") |
| Overall length | 48mm (1/16") to 152mm (1/2") |
| Pack | 1 drill per clam shell, 2 pack for 1/16", 5/64", 3/32", 7/64" and 1/8" |
Choosing the right option
| Option | Part number | SKU |
|---|---|---|
| 1/2 | 8011-1/2S | A0205261 |
| 1/4 | 8011-1/4S | A0205245 |
| 1/8 | 8011-1/8S | A0205237 |
| 1/16 | 8011-1/16S | A0205233 |
| 3/8 | 8011-3/8S | A0205253 |
| 3/16 | 8011-3/16S | A0205241 |
| 3/32 | 8011-3/32S | A0205235 |
| 5/16 | 8011-5/16S | A0205249 |
| 5/32 | 8011-5/32S | A0205239 |
| 5/64 | 8011-5/64S | A0205234 |
| 7/16 | 8011-7/16S | A0205257 |
| 7/32 | 8011-7/32S | A0205243 |
| 7/64 | 8011-7/64S | A0205236 |
| 9/32 | 8011-9/32S | A0205247 |
| 9/64 | 8011-9/64S | A0205238 |
| 11/32 | 8011-11/32S | A0205251 |
| 11/64 | 8011-11/64S | A0205240 |
| 13/32 | 8011-13/32S | A0205255 |
| 13/64 | 8011-13/64S | A0205242 |
| 15/32 | 8011-15/32S | A0205259 |
| 15/64 | 8011-15/64S | A0205244 |
| 17/64 | 8011-17/64S | A0205246 |
| 19/64 | 8011-19/64S | A0205248 |
| 21/64 | 8011-21/64S | A0205250 |
| 23/64 | 8011-23/64S | A0205252 |
| 25/64 | 8011-25/64S | A0205254 |
| 27/64 | 8011-27/64S | A0205256 |
| 29/64 | 8011-29/64S | A0205258 |
| 31/64 | 8011-31/64S | A0205260 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Saber Jobber Drill Bit M2-HSS TiN Coated (8011): 1/2
SKU: A0205261 | Model: 8011-1/2S
The 1/2" (12.7mm) Saber 8011-1/2S TiN coated M2-HSS jobber drill has a 114mm flute and is 152mm long overall. It has a 135° split point and is made to ANSI B94-11. It comes as one drill in a hang-sell clam shell. It has a feed of 0.25mm per revolution and spindle speeds of 1530 RPM in aluminium and brass, 752 RPM in medium carbon steel and 301 RPM in stainless steel.

