Saber 6mm TiN Jobber Drill 8010-6.00, Pack of 10
The price shown is for the pack.
Available
The Saber 8010 is a TiN coated M2-HSS jobber drill, sold by the size you need. Pick a diameter from 1mm to 13mm. Most sizes come in packs of 10, which suits workshops, fabricators and maintenance teams that go through drills regularly. Sizes from 7.2mm up come in packs of 5. M2 is a grade of high speed steel (HSS). A jobber drill is the standard length twist drill used in a hand drill, drill press or cordless drill.
TiN is titanium nitride, a hard gold coloured coating applied by physical vapour deposition (PVD). It helps to dissipate heat and reduces friction and cold welding, so higher speed and feed rates can be used and tool life is greatly increased. The 135° split point is self centering and needs less end thrust, which means less push on the drill. The drills are DIN 338. As with all coated tools, performance deteriorates after resharpening, so use coated drills until they are blunt and then replace them. How to choose: the 8010 is the bulk pack. If you only need one or two drills, Saber also sells these sizes as single and 2 pack hang sell drills in a clam shell (8010 sizes with an S on the end). For general purpose and non-ferrous work, plain bright drills cost less. For stainless and high tensile steel, step up to cobalt.
Where this product is used
- Everyday drilling in steel in workshops and on site
- Maintenance and fabrication shops that buy drills by the pack
- Production drilling where tool life and running faster matter
- Keeping the common sizes stocked in a service van or tool crib
Features
- TiN coated M2-HSS jobber drills
- Sizes 1mm to 13mm (see the size table below)
- Sold in packs of 10, or packs of 5 from 7.2mm up
- Gold TiN (titanium nitride) coating applied by physical vapour deposition (PVD)
- Coating helps dissipate heat and reduces friction and cold welding
- DIN 338 drills with a 135° split point
- Split point is self centering and needs less end thrust
- Flute length from 12mm to 101mm and overall length from 34mm to 151mm, depending on size
- Performance deteriorates after resharpening
Key specifications
| Specification | Detail |
|---|---|
| Brand | Saber |
| Part number | 8010-1.00 to 8010-13.00, one per diameter |
| Type | Jobber drill |
| Material | M2-HSS |
| Coating | TiN (titanium nitride), PVD |
| Point | 135° split point |
| Standard | DIN 338 |
| Diameters | 1mm to 13mm |
| Flute length | 12mm to 101mm, by size |
| Overall length | 34mm to 151mm, by size |
| Pack | Packs of 10, or packs of 5 from 7.2mm up |
Choosing the right option
| Option | Part number | SKU |
|---|---|---|
| 1 | 8010-1.00 | A0199545 |
| 1.5 | 8010-1.50 | A0199546 |
| 2 | 8010-2.00 | A0199547 |
| 2.5 | 8010-2.50 | A0199548 |
| 3 | 8010-3.00 | A0199549 |
| 3.2 | 8010-3.20 | A0199550 |
| 3.3 | 8010-3.30 | A0199551 |
| 3.5 | 8010-3.50 | A0199552 |
| 3.7 | 8010-3.70 | A0199553 |
| 3.9 | 8010-3.90 | A0199554 |
| 4 | 8010-4.00 | A0199555 |
| 4.1 | 8010-4.10 | A0199556 |
| 4.2 | 8010-4.20 | A0199557 |
| 4.5 | 8010-4.50 | A0199558 |
| 4.7 | 8010-4.70 | A0199559 |
| 4.9 | 8010-4.90 | A0199560 |
| 5 | 8010-5.00 | A0199561 |
| 5.1 | 8010-5.10 | A0199562 |
| 5.2 | 8010-5.20 | A0199563 |
| 5.5 | 8010-5.50 | A0199564 |
| 6 | 8010-6.00 | A0199565 |
| 6.2 | 8010-6.20 | A0199566 |
| 6.5 | 8010-6.50 | A0199567 |
| 6.6 | 8010-6.60 | A0199568 |
| 6.8 | 8010-6.80 | A0199569 |
| 6.9 | 8010-6.90 | A0199570 |
| 7 | 8010-7.00 | A0199571 |
| 7.2 | 8010-7.20 | A0199572 |
| 7.5 | 8010-7.50 | A0199573 |
| 7.8 | 8010-7.80 | A0199574 |
| 7.9 | 8010-7.90 | A0199575 |
| 8 | 8010-8.00 | A0199576 |
| 8.5 | 8010-8.50 | A0199577 |
| 8.8 | 8010-8.80 | A0199578 |
| 9 | 8010-9.00 | A0199579 |
| 9.2 | 8010-9.20 | A0199580 |
| 9.3 | 8010-9.30 | A0199581 |
| 9.4 | 8010-9.40 | A0199582 |
| 9.5 | 8010-9.50 | A0199583 |
| 9.9 | 8010-9.90 | A0199584 |
| 10 | 8010-10.00 | A0199585 |
| 10.2 | 8010-10.20 | A0199586 |
| 10.5 | 8010-10.50 | A0199587 |
| 10.8 | 8010-10.80 | A0199588 |
| 11 | 8010-11.00 | A0199589 |
| 11.5 | 8010-11.50 | A0199590 |
| 11.8 | 8010-11.80 | A0199591 |
| 12 | 8010-12.00 | A0199592 |
| 12.2 | 8010-12.20 | A0199593 |
| 12.5 | 8010-12.50 | A0199594 |
| 12.8 | 8010-12.80 | A0199595 |
| 12.9 | 8010-12.90 | A0199596 |
| 13 | 8010-13.00 | A0199597 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Saber TiN Coated M2-HSS Jobber Drill Bit (8010): 6
SKU: A0199565 | Model: 8010-6.00
The 6mm drill in the Saber 8010 range is 93mm long overall with a 57mm flute (the grooved cutting length), and comes as a pack of 10. It is a TiN coated M2-HSS jobber drill with a 135 degree split point, DIN 338.


