Hobson LSMSMSZPPM030006 M3 x 6mm Sems Pan Phillips Metal Thread Screw, Zinc

This page lists 20 Hobson Sems pan Phillips metal thread screw items in sizes M3 to M6 and lengths 6 to 30mm (pan head, Phillips drive, zinc finish).

The Hobson acronym list defines Sems as a screw with a permanently attached washer, Ph Dr as Phillips drive (cross recess) and MTS as metal thread screw (manufacturer-stated).

The pitch shown for each size is the coarse pitch given in the Hobson thread table (manufacturer-stated). The supplier description does not state the pitch, so match it to your nut or tapped hole.

Every item on this page is supplied as a box of 200.

Where this product is used

• Fitting into a tapped hole or with a nut of the same thread
• Replacing a screw of the same size, length and head style
• Assembling parts with a metric thread screw of a stated size and length

Features

• 20 items: sizes M3 to M6, lengths 6 to 30mm
• Pan head, Phillips drive, zinc finish
• Thread pitch for each size from the Hobson thread table (manufacturer-stated)
• Supplied as a box of 200

Common specifications

Key specifications

Selecting the right option

Match the thread of your tapped hole or nut: the diameter is the M size and the table shows the pitch for each size. A pan head has a low rounded top and sits above the surface.

Related products

Related screws: Hobson Sems Spring/Flat Washer Pan Torx Metal Thread Screw, Zinc, M3 and M4, 6 to 20mm, Hobson Pan Phillips Metal Thread Screw, Mild Steel, Zinc Plated, M2 to M8, 4 to 100mm and Hobson Pan Head Combi Metal Thread Screw, Mild Steel, Zinc Plated, M6 and M8 x 25mm.