Stahlwille Pin punches, 3.9 x 100mm

Stahlwille 109 is a pin punch in 8 sizes, with tip diameters from 0.9mm to 5.9mm, for driving out pins, rivets and spring pins. Sizes 1 to 7 have a guide sleeve. Wear eye protection when striking, and use a hammer that suits the tool.

Where this product is used

• Driving out pins, rivets and spring pins
• Aligning holes during assembly
• Fitting and maintenance work on machinery and vehicles

Features

• Tip diameters 0.9, 1.4, 1.8, 2.4, 2.8, 3.4, 3.9 and 5.9mm
• Sizes 1 to 7 with guide sleeve
• Weights from 7 g to 47 g
• Tip diameter: 0.9 to 5.9mm

Key specifications

Choosing the right option

Pick the size by the pin or rivet you need to drive out: the tip diameter should be just under the pin diameter. For sets of punches see the Stahlwille 108/6 D pin punch set and the Stahlwille 105-8/6 K pin punch and centre punch set, and for marking centres see the Stahlwille 105 centre punch, 120 x 10mm.

Related Stahlwille products: Stahlwille 108/6 D pin punch set, Stahlwille 108/6 T pin punch set, Stahlwille 105-8/6 K pin punch and centre punch set, Stahlwille 105 centre punch, 120 x 10mm.