Strong Hand MSA46-HD Adjust-O Magnet Square, 40kg Pull Force, 110 x 95 x 29mm

Strong Hand Adjust-O magnet squares in four versions: the MSA45, MSA46-HD, MSA48-HD and MSA53-HD.

They hold metal workpieces at 30°/60°, 45° and 90° (manufacturer-stated). Strong Hand lists maximum pull forces of 30, 40, 65 and 75kg across the MSA45, MSA46-HD, MSA53-HD and MSA48-HD (manufacturer-stated). Each has an on/off switch with a mid-point position for alignment and easy part placement, rare earth magnets and a fully enclosed body that wipes clean (manufacturer-stated). The HD models use a double plate (manufacturer-stated).

Where this product is used

• Holding metal workpieces at 30°/60°, 45° and 90° (manufacturer-stated)
• Holding round and square tubing, angle and flat stock (manufacturer-stated)
• Tack welding only: remove the magnet before completing the weld (manufacturer-stated)

Features

• On/off switch for quick set-up, with a mid-point position for alignment and easy part placement (manufacturer-stated)
• Rare earth magnets (manufacturer-stated)
• Fully enclosed for easier cleaning: turn off and wipe (manufacturer-stated)
• HD models: double plate (manufacturer-stated)

Common specifications

Key specifications

Maximum pull force, dimensions and weight as printed by Strong Hand for each part number. Dimensions are Strong Hand's figures and can differ by a millimetre or two from the size option.

Selecting the right option

Choose by pull force and size. The MSA45 and MSA46-HD share a 110 x 95mm footprint (25mm and 29mm thick) at 30 and 40kg (manufacturer-stated). The MSA48-HD and MSA53-HD share a 150 x 130 x 35mm body at 75 and 65kg (manufacturer-stated). Strong Hand prints pull force against the longest side of the magnet on 3/8" thick steel, and says to use the magnets for tack welding only (manufacturer-stated).

Related products

Two switches, larger bodies: Adjust-O 90° Dual Switch Magnet. Smaller squares: Mini Magnet Square. Fixed 60° and 90°: MS60 Multi-Angle Magnet.