Saber 6.5mm TiN Jobber Drill 8010-6.50S, Single
Available
The Saber 8010 clam shell is a TiN coated M2-HSS jobber drill sold on a hang sell card, ready for a retail shelf or a single job. Pick a diameter from 1mm to 13mm. The 1mm to 3mm sizes come as a 2 pack. From 3.5mm up, you get a single drill. M2 is a grade of high speed steel (HSS). A jobber drill is the standard length twist drill used in a hand drill, drill press or cordless drill.
TiN is titanium nitride, a hard gold coloured coating applied by physical vapour deposition (PVD). It helps to dissipate heat and reduces friction and cold welding, so higher speed and feed rates can be used and tool life is greatly increased. The 135° split point is self centering and needs less end thrust, which means less push on the drill. The drills are DIN 338. As with all coated tools, performance deteriorates after resharpening, so use coated drills until they are blunt and then replace them. How to choose: this is the pack for one or two drills. If you use a size regularly, the Saber 8010 bulk pack (10 drills, or 5 in the larger sizes) is better value per drill. For general purpose and non-ferrous work, plain bright drills cost less. For stainless and high tensile steel, step up to cobalt.
Where this product is used
- One-off drilling jobs in steel in the workshop or on site
- Replacing a worn or broken drill in a drill index
- Tradespeople and DIYers who only need a drill or two
- Keeping a few spare sizes in the ute
Features
- TiN coated M2-HSS jobber drills
- Sizes 1mm to 13mm (see the size table below)
- Hang sell clam shell: 2 pack for 1mm to 3mm, single drill for 3.5mm to 13mm
- Gold TiN (titanium nitride) coating applied by physical vapour deposition (PVD)
- Coating helps dissipate heat and reduces friction and cold welding
- DIN 338 drills with a 135° split point
- Split point is self centering and needs less end thrust
- Flute length from 12mm to 101mm and overall length from 34mm to 151mm, depending on size
- Performance deteriorates after resharpening
Key specifications
| Specification | Detail |
|---|---|
| Brand | Saber |
| Part number | 8010-1.00S to 8010-13.00S, one per diameter |
| Type | Jobber drill |
| Material | M2-HSS |
| Coating | TiN (titanium nitride), PVD |
| Point | 135° split point |
| Standard | DIN 338 |
| Diameters | 1mm to 13mm |
| Flute length | 12mm to 101mm, by size |
| Overall length | 34mm to 151mm, by size |
| Pack | 2 pack for 1mm to 3mm, single drill for 3.5mm to 13mm |
Choosing the right option
| Option | Part number | SKU |
|---|---|---|
| 1 | 8010-1.00S | A0199598 |
| 1.5 | 8010-1.50S | A0199599 |
| 2 | 8010-2.00S | A0199600 |
| 2.5 | 8010-2.50S | A0199601 |
| 3 | 8010-3.00S | A0199602 |
| 3.5 | 8010-3.50S | A0199603 |
| 4 | 8010-4.00S | A0199604 |
| 4.5 | 8010-4.50S | A0199605 |
| 5 | 8010-5.00S | A0199606 |
| 5.5 | 8010-5.50S | A0199607 |
| 6 | 8010-6.00S | A0199608 |
| 6.5 | 8010-6.50S | A0199609 |
| 7 | 8010-7.00S | A0199610 |
| 7.5 | 8010-7.50S | A0199611 |
| 8 | 8010-8.00S | A0199612 |
| 8.5 | 8010-8.50S | A0199613 |
| 9 | 8010-9.00S | A0199614 |
| 9.5 | 8010-9.50S | A0199615 |
| 10 | 8010-10.00S | A0199616 |
| 10.5 | 8010-10.50S | A0199617 |
| 11 | 8010-11.00S | A0199618 |
| 11.5 | 8010-11.50S | A0199619 |
| 12 | 8010-12.00S | A0199620 |
| 12.5 | 8010-12.50S | A0199621 |
| 13 | 8010-13.00S | A0199622 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
TiN Coated M2-HSS Jobber Drill Bit - Clam Shell (8010): 6.5
SKU: A0199609 | Model: 8010-6.50S
The 6.5mm drill in the Saber 8010 range is 101mm long overall with a 63mm flute (the grooved cutting length), and comes as a single drill. It is a TiN coated M2-HSS jobber drill with a 135 degree split point, DIN 338.


