Skip to content

Turning Insert DNMU Insert Style - MF2 Grade TK0501: DNMU110408-MF2 TK0501

SKU: A0116932 | Model: 03062528

Seco Turning Insert D Shape Code 4.76 x 0.8 x 9.53mm U Insert Type - MF2 Grade TK0501 ± 0.13/± 0.05mm Tolerance DNMU110408-MF2,TK0501 10pcs

Turning Insert DNMU Insert Style - MF2 Grade TK0501

D shape code.

U insert type, negative insert with hole and chip-breaker on both faces for tool holders with pin lock only.

TK0501 insert grade.

TK0501 Insert Grade

Duratomic® grade.

An extremely wear-resistant optimized grade choice for machining of grey cast iron and easier ductile cast irons.

Ti(C,N) + Al2O3 + Used Edge Detection (Chrome).

MF2 Chipbreaker Programme

First choice for finishing with negative inserts.

Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev.

Good capacity for medium rough machining.

Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.

About Seco Turning Insert

Anything is possible when it comes to our broad selection of general turning grades and chip breakers.

Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.

to boost the productivity and tool life in your turning applications.

Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.

Quote Cart