KCP Taper Grid Coupling Vertical Split Steel Cover
Available
This is the Type V cover for the KCP taper grid coupling, a vertical split steel cover, in sizes 1020 to 1150. It covers the grid and hubs and holds the lubricant in the coupling. The parts of the coupling are the oil seal, cover, hub, grid, gasket, bolt and lube plug.
A complete coupling uses two hubs, one grid and one cover. The cover comes as a horizontal split aluminium cover (Type H) or a vertical split steel cover (Type V).
Where this product is used
- Drives where shock load or vibration needs to be reduced
- Drives with parallel or angular shaft misalignment, or with end float
- Drives that reverse or need a smooth start
- Replacing pin-bush flange or chain couplings
Features
- Accommodates parallel misalignment, angular misalignment and end float
- Torsionally flexible: the grid flexes to take up changing loads, shock and vibration
- A damaged part can be replaced on its own, rather than the whole coupling
- Covered and lubricated: grease goes in through the lube plug of the assembled coupling
- Vertical split steel cover, Type V, with higher maximum speeds than the Type H cover (for example 6,000rpm against 4,500rpm at size 1020)
Key specifications
| Specification | Detail |
|---|---|
| Brand | KCP |
| Product type | Coupling Cover |
| Type | Taper grid coupling |
| Component | Vertical split steel cover (Type V) |
| Cover type | Type V, vertical split, steel |
| Sizes | 1020 to 1150 (14 sizes) |
| Basic torque | 47.7 to 36,156Nm (486 to 368,686kg-cm), depending on size |
| Maximum speed | 2,000 to 6,000rpm, depending on size |
| Maximum bore | 30mm (size 1020) to 203mm (size 1150) |
Fitting and use
Grease the grid and the hub teeth before the covers are fitted, then fill the assembled coupling with grease through the lube plug.
Choosing the right option
To size the coupling, work out the design torque. Use the lowest operating speed of the application.
Choose the size whose basic torque is equal to or above the design torque, then check the shaft diameters against the maximum bore of that size. If the bore is too small, step up to the next size. Check the maximum speed for the size and cover type as well.
See also: taper grid coupling hub, taper grid coupling grid element, horizontal split aluminium cover.
| Option | Part number | SKU |
|---|---|---|
| 1020 | A0148884 | |
| 1030 | A0148885 | |
| 1040 | A0148886 | |
| 1050 | A0148887 | |
| 1060 | A0148888 | |
| 1070 | A0148889 | |
| 1080 | A0148890 | |
| 1090 | A0148891 | |
| 1100 | A0148892 | |
| 1110 | A0148893 | |
| 1120 | A0148894 | |
| 1130 | A0148895 | |
| 1140 | A0148896 | |
| 1150 | A0148897 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
KCP Taper Grid Coupling Vertical Split Steel Cover, Sizes 1020 to 1150: 1120
SKU: A0148894 | Model: 1120V
Size 1120. Vertical Split Steel Cover Taper Grid Coupling Type V cover, vertical steel cover. Best choice for high operating speeds. Allows easy access to the grid spring. Steel grid cover for strength. *** Cover Only **** About KCP Taper Grid Coupling Taper Grid Couplings are recognizable due to their unique steel flexible grid running through the tapered hubs. The benefits of the Grid Coupling are reduced vibration and shock loads. The compact size of shaft-to-shaft couplings. Handle torque capacity due to high strength hardened alloy steel construction Deflect torsionally for normal shock or vibratory loads. Capacity for misalignment without producing the detrimental side loads. Designed with a trapezoidal cross-section and tempered for spring hardness. Increase in strength rating and provide reserve strength for a longer part life. Easy to fit the trapezoidal grids into the slots of the hub and short time of installation. Free to rock, pivot, and float.