Nupla

Nupla Fibreglass Hammer Handles, Drilling Hammers & Shovels

Nupla is an American hand tool and handle manufacturer with over 75 years of experience producing fibreglass-core tool handles, drilling hammers, ball pein hammers, and long-handle shovels for construction, mining, civil engineering, and general industrial maintenance.

Nupla’s signature fibreglass core handle technology provides critical advantages over traditional timber handles in demanding site conditions: fibreglass does not swell, crack, split, or loosen in the head eye under moisture cycling, does not char or weaken from heat exposure near welding and cutting operations, and does not conduct electricity — making Nupla handles the preferred replacement for timber handles in tools used near electrical hazards.

The fibreglass core is bonded to a durable grip overmould that provides vibration damping to reduce operator fatigue during sustained striking and digging operations on hard ground, rock, and concrete substrates.

For mining, construction, and civil contractors who rely on sledgehammers, drilling hammers, and shovels as primary tools on site, the longer service life and reduced handle replacement frequency of fibreglass-core handles delivers a genuine cost-of-ownership advantage over timber that typically pays back within the first replacement cycle.

AIMS Industrial supplies Nupla’s range including round-mouth long-handle shovels, fibreglass replacement shovel handles, drilling hammers, hammer handles, and ball pein hammers in multiple head weights. Order online today with Australia-wide delivery.

Nupla Shovels & Fibreglass Shovel Handles

Nupla’s shovel and shovel handle range is built for sustained digging in hard and abrasive ground conditions where timber-handled shovels fail prematurely. Buy direct from AIMS Industrial.

• Nupla Round Shovel Long Handle: A long-handle round-mouth shovel with a Nupla fibreglass core handle for digging, scooping, and moving bulk materials in mining, construction, and civil applications. The round-mouth profile penetrates hard-packed ground and granular materials more efficiently than a square-mouth blade, and the long handle reduces operator back bend angle for sustained digging tasks. The fibreglass handle will not loosen in the socket or split along the grain under the impact and torque loads of heavy digging in stony ground and clay, unlike timber handles that degrade rapidly in wet conditions common on construction sites.
• Nupla Fibreglass Shovel Handle — 1200mm: A 1,200mm fibreglass replacement shovel handle for re-handling worn or broken shovels. Using a Nupla fibreglass handle as a replacement restores a quality shovel blade to full service at a fraction of the cost of a new tool. The fibreglass shaft is dimensioned for standard round-eye and D-handle shovel blade sockets and is compatible with most Australian-standard shovel blade profiles. Order as a spare for remote site tool repair where new tools cannot be sourced quickly.

Nupla Drilling Hammers, Hammer Handles & Ball Pein Hammers

Nupla’s hammer range delivers the striking power required for mining, demolition, and heavy fabrication with the durability advantage of fibreglass handles. Order from AIMS Industrial for fast delivery to site.

• Nupla Drilling Hammer: A heavy-duty drilling hammer (club hammer) with a fibreglass Nupla handle for driving star drills, cold chisels, wedges, and staking pins in rock, concrete, and compacted ground. Drilling hammers are specified by geologists, mining crews, civil construction teams, and demolition contractors for breaking and driving operations where the double-faced head provides an interchangeable striking face. The Nupla fibreglass handle absorbs significantly more vibration per strike than steel or solid fibreglass handles, reducing cumulative hand-arm vibration exposure for operators using drilling hammers repeatedly throughout a shift.
• Nupla Hammer Handle: A fibreglass replacement hammer handle for re-heading sledgehammers, drilling hammers, and hand hammers with damaged or worn timber handles. The fibreglass handle is sized and tapered to suit standard metric and imperial hammer eye profiles and is fitted with a wedge expansion system for secure head retention without the glue-and-dry cycle required for timber handles. The fibreglass construction means the handle will not dry out, shrink, or loosen over time in dry or desert site conditions where timber handles regularly work loose within weeks of fitting.
• Nupla Ball Pein Hammer — Serrated Grip: A ball pein hammer with a fibreglass Nupla handle and serrated anti-slip grip for engineering, blacksmithing, rivet heading, and cold-forming operations. The ball pein face is used for setting and heading rivets, rounding off bolt ends, and striking punches and chisels, while the flat face is used for general driving. The serrated grip provides positive hand retention in oily, wet, and gloved conditions encountered in workshop and field maintenance where grip security is critical during high-force striking operations.

Order Nupla at AIMS Industrial and browse our Hand Tools and Thor hammer collections.

Order online, Contact our team for assistance or to Request a quote.