Buy Stick Welding Accessories Online in Australia
Stick Welding Accessory Selection — Quick Reference
Stick welding accessories = COMPONENTS turning stick welder into COMPLETE setup — electrodes + holder + earth + cables + chipping hammer + wire brush. Site + outdoor + workshop stick welding standard.
| Stick Welding Item | Best For |
|---|---|
| Electrode Holder (Stick / MMA) | Workshop standard — 200A/300A/500A |
| Earth Clamp (200A/300A/500A) | Workpiece earth attachment |
| Stick Electrodes (E6013 / E7018) | General mild steel / low-hydrogen |
| Welding Cable (35mm² / 50mm²) | Match cross-section to amperage |
| Chipping Hammer + Wire Brush | Slag removal — essential |
| Rod Oven (Electrode Storage) | Keep low-hydrogen electrodes dry |
| Welding Helmet (Auto-Darkening) | See welding helmets |
| Welding Gloves + Jacket | See welding gloves |
Critical: Stick + arc welding = workshop standard for site + outdoor (wind-tolerant vs MIG/TIG). Match electrode AWS classification (E6013 = general; E7018 = low-hydrogen structural). Store E7018 in rod oven — moisture absorption ruins weld. Brands: Bossweld, Gemini, Tecmen. Companion: welding, welding supplies, MIG vs TIG vs Stick.
Stick Welding Accessories for Australian Trade and Industrial Welding
Stick welding accessories cover the components that turn a stick welder into a complete welding setup — electrode holders, earth clamps, welding leads, rod ovens, electrode racks, and the consumables that keep stick welding work flowing. For Australian fabricators, maintenance teams, and trade welders running stick (SMAW) welding for repair, fabrication, and outdoor work, the right accessories are essential. AIMS Industrial supplies stick welding accessories from Bossweld and approved trade brands.
The accessory types we stock
- Electrode holders (stick holders) — for clamping the welding electrode and connecting to the welding lead
- Earth clamps (ground clamps) — for connecting the work-side return circuit; copper-jaw and lever clamps
- Welding leads (cables) — flexible welding cables for electrode and earth circuit; copper and aluminium-conductor in various amperage ratings
- Cable connectors and quick-connectors — for joining and disconnecting welding lead sections
- Rod ovens (electrode dryers) — temperature-controlled storage for keeping low-hydrogen electrodes dry
- Portable rod tubes — heated tubes for site work where carrying smaller quantities of dried electrode is needed
- Electrode racks and stands — for organised electrode storage in workshops
- Chipping hammers and wire brushes — for cleaning slag and surface preparation
Where stick welding earns its place
- Repair and maintenance work — stick welding handles dirty surfaces, varied positions, and outdoor conditions better than MIG or TIG
- Outdoor and site welding — wind doesn't disrupt stick welding the way it does gas-shielded processes
- Heavy fabrication — high-deposition stick electrodes lay down weld metal fast on heavy plate
- Pipeline welding — root and fill passes on pipelines, particularly cross-country and remote work
- Mining and resources — equipment repair in field conditions where shielding gas isn't practical
Sizing accessories — match to amperage
- Light-duty (up to 200A) — 25mm² welding leads, light-duty holders and earth clamps
- Medium-duty (up to 350A) — 35-50mm² welding leads, medium-duty holders
- Heavy-duty (up to 500A) — 70mm² welding leads, heavy-duty holders and earth clamps
- Industrial (above 500A) — 95mm² leads, industrial-grade holders rated for sustained high amperage
Match accessory ratings to the welder's maximum output amperage; undersized accessories overheat under sustained welding and fail in service.
Rod ovens and electrode storage
Low-hydrogen electrodes (E7016, E7018, E7028) absorb moisture from the atmosphere when stored at room temperature. Welding with damp electrodes causes porosity, cracking, and weld defects — particularly serious in structural and pipeline welds. Rod ovens maintain electrodes at 100-150°C (storage temperature) or higher (re-baking temperature) to drive moisture out and keep electrodes weld-ready. For workshops doing serious low-hydrogen welding, rod oven and portable rod tube use is essential.
Brands stocked at AIMS
Bossweld is the core brand for stick welding accessories — Australian-supplied and matched to the welding equipment commonly running in Australian workshops. INEFIL is stocked for welding consumables alongside the accessories. For specific brand requirements or specialty accessories, sourcing through our distribution channels covers most options.
Companion ranges at AIMS
Stick welding accessories sit alongside our broader welding range — see MIG welding accessories, TIG welding accessories, multiprocess welders, and stainless welding rods for the related products.
Need help speccing stick welding accessories for trade or industrial use? contact our team — we'll match holders, leads, and storage to your work.
People Also Ask — Stick Welding Accessories
Q: How do I choose between an E6013 and an E7018 stick electrode for a job?
E6013 suits general mild steel work, while E7018 is the low-hydrogen choice for structural welding — choose based on whether the job calls for general-purpose or structural-grade requirements.
Q: Why do low-hydrogen electrodes need to be stored in a rod oven?
Low-hydrogen electrodes (E7016, E7018, E7028) absorb moisture from the air at room temperature. If they get damp, this leads to porosity, cracking and other weld defects — a rod oven holds them at 100-150°C for storage (or higher for re-baking) to keep them weld-ready.
Q: What's a portable rod tube used for?
A portable rod tube is a heated tube for carrying a smaller quantity of dried electrodes on site work, keeping them protected from moisture away from a fixed rod oven.
Q: How do I size welding leads and accessories to my welder?
Match accessory size to your welder's maximum output amperage: light-duty up to 200A needs 25mm² leads, medium-duty up to 350A needs 35-50mm² leads, heavy-duty up to 500A needs 70mm² leads, and industrial welders above 500A need 95mm² leads. Undersized accessories will overheat and fail.
Q: Why is stick welding still used over MIG or TIG in some situations?
Stick welding handles dirty surfaces, varied welding positions, and outdoor conditions better than MIG or TIG, and it's wind-tolerant unlike gas-shielded processes. It's also used for pipeline root and fill passes, and for field repair work in mining and resources where shielding gas isn't practical.
Q: What accessories are needed for slag removal after stick welding?
Chipping hammers and wire brushes are essential accessories for removing slag after a stick weld.