Buy 1/4" Loc-Line Elbows Online in Australia
Four Loc-Line listings make up this range, all for the 1/4 inch modular hose system: a 1/4 inch elbow fitting, an acid resistant elbow fitting, an extended elbow kit and a pack of 20 extended elbows. Elbows are fixed-angle fittings that redirect a hose run, which is handy for routing coolant around a fixture or through a tight spot. Not sure which one you need? Ask our team.
What's in the range
| Part | Listings | What the titles tell you |
|---|---|---|
| Elbow fitting | 1 | 3 variants (black, 2 pack; orange, 2 pack; orange, 20 pack) |
| Acid resistant elbow fitting | 1 | 2 and 20 packs |
| Extended elbows | 2 | An extended elbow kit and a pack of 20 extended elbows |
Choosing an elbow
An elbow sets a fixed angle, so it holds a direction change rigidly and does not let you reposition the hose like a standard segment. Use the acid resistant version where the listing's acid resistance matters for your fluid, and check chemical compatibility on the data sheet first. The extended elbows are listed separately from the standard elbow fitting, so check the product page for the difference. These are for the 1/4 inch system only. Always check the data sheet. It is the source for sizes and fitment.
Related ranges
Start with the 1/4 inch Loc-Line system. Also see 1/4 inch Y fittings, 1/4 inch double sockets, lathe adapters, 1/4 inch assembly pliers and our Loc-Line Modular Hose Guide: Sizes, Nozzles & Coolant Delivery.
Order from AIMS Industrial
Call us on (02) 9773 0122, contact the team or request a quote. We have supplied Australian industry since 1988.
1/4 inch Loc-Line Elbows FAQs
What does an elbow do in a modular hose run?
It redirects the hose at a fixed angle, so you can route coolant around components or through a tight spot without a loose bend.
What is the acid resistant elbow for?
It is the acid resistant version of the standard elbow. Check the data sheet for chemical compatibility with your fluid before you order.
Do these suit the 1/2 inch system?
No. These are for the 1/4 inch system. The 1/2 and 3/4 inch systems have their own elbows.