Buy 1/4" Loc-Line Y Fittings Online in Australia
Two Loc-Line parts make up this range, both for the 1/4 inch modular hose system: a 1/4 inch Y fitting and an acid resistant Y fitting. A Y fitting splits one hose run into two branches, so one coolant supply can feed two nozzle positions. Not sure which one you need? Ask our team.
What's in the range
| Part | Listings | Variants |
|---|---|---|
| 1/4 inch Y fitting | 1 | 2 (black, 20 pack; orange, 2 pack) |
| 1/4 inch acid resistant Y fitting | 1 | 2 and 20 packs |
Choosing a Y fitting
Use the standard Y fitting for general coolant. The acid resistant version is listed separately, so check chemical compatibility on the data sheet before you use it with your fluid. Both are for the 1/4 inch system only, so for 1/2 or 3/4 inch hose see the related ranges below. Always check the data sheet. It is the source for sizes and fitment.
Related ranges
Start with the 1/4 inch Loc-Line system. Also see 1/4 inch elbows, 1/4 inch double sockets, 1/2 inch Y fittings and 3/4 inch Y fittings.
Order from AIMS Industrial
Call us on (02) 9773 0122, contact the team or request a quote. We have supplied Australian industry since 1988.
1/4 inch Loc-Line Y Fittings FAQs
What does a Y fitting do?
It splits one modular hose run into two branches, so a single supply can feed two nozzle positions.
What is the acid resistant Y fitting for?
It is the acid resistant version of the standard Y fitting. Check the data sheet for chemical compatibility with your fluid before you order.
Can I split 1/4 inch hose into 1/2 inch?
The 1/2 inch Y reducer is listed in the 1/2 inch Y fittings range as a 1/2 inch to 1/4 inch reducer. See that range for the details.