Buy Cable Clamps & Tie Mounts Online in Australia
Cable clamps and tie mounts hold cables and hose runs in place so they don't rub, hang or work loose. AIMS Industrial stocks Champion nylon cable clamps and self-adhesive cable tie mounts, plus clamp and mount kits from Champion and GJ Works, for workshop, automotive and general electrical wiring. If you're weighing up which one to choose, our Cable Management Guide is a good place to start.
Cable Clamps & Tie Mounts — Quick Reference
| Product | Sizes / pack | Best for |
|---|---|---|
| Champion Cable Clamp Nylon | 6 sizes, 4.8 to 15.8 mm | Holding cable and hose bundles against a surface |
| Champion Cable Clamp Nylon (UC) | 6 sizes, 4.8 to 15.8 mm | As above |
| Champion Cable Tie Mount Self Adhesive (HC) | 3.5 mm and 5 mm | An anchor point for a cable tie, no drilling needed |
| Self-Adhesive Cable Tie Mount | 3.5 mm and 5 mm | As above |
| Champion CA124 nylon cable P clamp and tie mount kit | 124 pieces | Workshop and service-vehicle stock |
| GJ Works Cable Tie Mounts & Clamps GKA80 | 80 pieces | Vehicle, trailer and general electrical work |
| Cable Clamp Assortment Refill | 6 sizes, 4.8 to 15.8 mm | Restocking a clamp assortment |
Choosing Cable Clamps and Tie Mounts
Clamps: a nylon cable clamp holds a cable or hose bundle against a panel, chassis or frame. It stops the cable moving and rubbing, which protects the insulation. Choose the size that fits the cable or bundle snugly.
Self-adhesive tie mounts: a tie mount gives a cable tie a fixed anchor point on a flat surface without drilling. For the adhesive to hold, fit it to a clean, dry surface. For a surface that vibrates or is exposed to heat, check the product page to confirm the mount suits the job.
Kits: a kit gives a workshop or service vehicle a mix of sizes in one case. See the Champion CA124 (124 pieces) and the GJ Works GKA80 (80 pieces).
Always check the data sheet: sizes, material and temperature range differ between products. Check the product page, or contact us if you are unsure which suits your job.
Related Ranges
See Wire & Cable Management for cable ties, split conduit, heat shrink and quick connectors, plus Terminals, Heat Shrink Tubing and the full Electrical & Electronic range.
Order from AIMS Industrial
AIMS Industrial is Australian-owned and supplies trade, engineering and maintenance teams. For product advice, stock availability or a bulk/trade quote, call our Sydney team on (02) 9773 0122, get in touch via Contact Us, or submit a Request a Quote for larger orders.
People Also Ask — Cable Clamps & Tie Mounts
What is a cable clamp used for?
A cable clamp holds a cable or hose bundle against a surface such as a panel, chassis or frame. It stops the cable moving and rubbing, which protects the insulation. Champion nylon cable clamps come in six sizes from 4.8 to 15.8 mm.
What is a cable tie mount?
A cable tie mount is an anchor point for a cable tie, so a cable run stays where you put it. The Champion self-adhesive tie mounts stick to a flat surface, so no drilling is needed.
How do I get a self-adhesive tie mount to stick?
Fit it to a clean, dry surface and press it down firmly. For a surface that vibrates or gets hot, check the product page to confirm the mount suits the job.
What kits do you have for cable clamps and tie mounts?
The Champion CA124 kit of nylon cable P clamps and tie mounts (124 pieces) and the GJ Works GKA80 cable tie mounts and clamps kit (80 pieces).