Buy Cut-Off Wheels Online in Australia
AIMS Industrial lists 101 cut-off wheels from Pferd, Flexovit, Klingspor and Dymaxion, with a few from other brands. The range covers wheels for steel, stainless steel (Inox), aluminium, stone and masonry, and rail, in sizes from 50mm up to 406mm. There are options for angle grinders, stationary chop saws and engine-driven machines, plus diamond cut-off wheels. Our cutting disc guide explains the types if you are comparing options.
What's in the range
| Brand | Listings | What's there |
|---|---|---|
| Pferd | 48 | Flat and raised hub wheels for steel, Steelox, Inox, aluminium and stone; ultra thin and extra slim wheels; low speed stationary, high speed portable and stationary, rail and pipe notching wheels; diamond cut-off wheels (continuous, segmented, turbo) and an asphalt diamond blade; a Duodisc cut-off and grind wheel; a reducing ring and an arbor |
| Flexovit | 24 | Metal, Inox, aluminium, masonry, multi material and rail wheels; ultra thin and cordless wheels; depressed centre wheels; low speed chop saw wheels |
| Klingspor | 18 | Supra, Special and Extra grades for stainless steel, aluminium, alloys and titanium, metals, and stone and concrete; hard and soft grit wheels; a D.I.Y. range wheel |
| Dymaxion | 8 | Metal, stainless steel (Inox) thin, masonry and low speed stationary cutting discs, including 75mm and 125mm packs and tubs |
| Other brands | 3 | Norton non reinforced toolroom wheel, Trax cutting disc and Inox World ultra thin cutting disc |
Choosing a cut-off wheel
Match the wheel to the material first: steel, stainless steel, aluminium, stone or rail each have wheels listed for them. Then match the machine, as there are wheels for angle grinders, stationary chop saws, high speed portable saws and engine-driven machines. Check the diameter and bore against your grinder or saw and its guard. Thinner wheels remove less material, while thicker wheels are sturdier on longer or tougher cuts. Cut-off wheels are made for cutting, so do not use one for grinding unless the listing says it is a combined wheel. Always check the data sheet for the maximum operating speed, material suitability and handling and storage requirements.
Related ranges
Order from AIMS Industrial
AIMS Industrial has supplied Australian industry since 1988. Call us on (02) 9773 0122, contact the team or request a quote and we'll help match the right wheel to your material, machine and volume.
Cut-Off Wheels FAQs
Can I use a cut-off wheel for grinding?
Not unless the listing says it is made for both. Cut-off wheels are designed for cutting, and side loading can damage them. The Pferd Duodisc is listed as a combined cut-off and grind wheel, so check each listing and its data sheet.
Which cut-off wheel should I use for stainless steel?
Look for wheels listed for stainless steel or Inox. Pferd, Flexovit, Klingspor and Dymaxion all list wheels for stainless, including ultra thin options. Check the data sheet to confirm it suits your material and machine.
What size cut-off wheel do I need?
Match the wheel diameter and bore to your grinder or saw and its guard. The size is shown in each listing, from small 50mm wheels to 406mm rail wheels. Call (02) 9773 0122 if you are not sure and we'll help.