Buy Die Grinders Online in Australia
Die grinders are compact hand-held grinders that run small mounted points, burrs and abrasive tools in a collet, used for deburring, porting, weld clean-up and finishing in tight spots. This range has 24 active listings: 19 air die grinders from Trax, 4 electric die grinders from Metabo and 1 cordless die grinder from Hikoki.
What's in the range
| Type | Listings | What's there |
|---|---|---|
| Straight air die grinders | 13 | Trax air die grinders including the ARX-111 general purpose (22000 RPM), ARX-113M mini (1/4 and 1/8 inch collets, 25000 RPM), ARX-132NE extended (22000 RPM), ARX-ST200 heavy-duty, ARX-1106G low-speed, KPT-24DG and KPT-NG45A models, and the roll throttle and safety lever industrial models. |
| Angle air die grinders | 3 | Trax ARX-114N 90 degree (18000 RPM), ARX-1120AH 120 degree (20000 RPM) and ARX-1105A composite angle die grinder. |
| Air die grinder kits | 3 | Trax ARX-111K and ARX-ST200K heavy-duty kits with a 10 piece shank stone set, and the KPT-24DGK mini die grinder kit. |
| Electric die grinders | 4 | Metabo GE 710 Compact (short spindle), GE 710 Plus (long spindle), GEP 710 Plus and GEP 950 G Plus, with 1/4 inch collets listed on the 710W models. |
| Cordless die grinders | 1 | Hikoki GP18DB 18V brushless die grinder with paddle switch, skin only (battery and charger not included). |
Choosing a die grinder
Choose air if you have a compressor that can supply the air volume the tool needs, electric or cordless where you don't. Check the collet size against the tools you plan to use, and choose an angle head for access in tight spots and an extended or long spindle model for reach. Run the tool at or below the rated speed of the accessory. Always check the data sheet for the collet size, speed, air consumption and power of the exact grinder before you order.
Related ranges
Mounted Points | Burrs | Air Tools & Pneumatics | Power Tools | Cordless Power Tools | Trax
Order from AIMS Industrial
AIMS Industrial has supplied Australian industry since 1988. Call us on (02) 9773 0122, contact the team or request a quote and we'll help match the right die grinder to your air supply and accessories.
Die Grinder FAQs
What is a die grinder used for?
It is a small, high-speed hand grinder that drives mounted points, carbide burrs and other small abrasives, used for deburring, shaping, porting and cleaning up welds in places an angle grinder cannot reach.
Air or electric die grinder?
Air die grinders are light and compact but need a compressor that can supply enough air volume. Electric and cordless models need no compressor. Check the air consumption on the data sheet before you choose an air model.
What collet size do I need?
It depends on the shank of the tools you will use. The Metabo 710W models are listed with a 1/4 inch collet, and the Trax ARX-113M mini grinder lists 1/4 and 1/8 inch collets. Check the listing for the others.